Announcement

Collapse
No announcement yet.

MXQ "All Black" S805 Versions / HD18q / and Clones Directory

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ok to test the bottom you will need a multimeter put on sound is like the wifi bit horizontal, to listen, if you put the black and red it make a pit
    now go to the one in recovery and test the booton, if sound without any pressure is stuck, just change it
    Look for YouTube videos of how make it
    Is easy, just 2 or 3 minutes

    Comment


    • To make working the wifi first you need to know your wifi module
      you need to open the box and check the wifi, the correct number
      Now search the number with this format
      xxxxus.ko
      Xxxx is the number on your wifi
      now just copy that on a USB Use a explorer, could be esexplorer
      Locate system/bin/
      There should be files with ko ko
      One is 8189us.ko
      Change it with the one that you look for your wifi and rename it with 8189us.ko
      So if your file is 8185de.ko will be set at 8189us.ko to copy on system/lib on the box

      Comment


      • Originally posted by mikino View Post
        Ok to test the bottom you will need a multimeter put on sound is like the wifi bit horizontal, to listen, if you put the black and red it make a pit
        now go to the one in recovery and test the booton, if sound without any pressure is stuck, just change it
        Look for YouTube videos of how make it
        Is easy, just 2 or 3 minutes
        forgive me i dont completely follow: so i do have a multimetre to hand - with red and black am i testing each PIN on Nand for a short indication?

        Comment


        • No just the pins on the bottom at the back at av

          Comment


          • If there you have continuing means that the bottom is stuck, so you have to replace it, is cheap 25 or 50 cents the bo5ton, more expensive is the tools

            Comment


            • Originally posted by mikino View Post
              If there you have continuing means that the bottom is stuck, so you have to replace it, is cheap 25 or 50 cents the bo5ton, more expensive is the tools
              i could unsolder the button - see if that makes a difference...

              Comment


              • Good day to all. Comrade brought a similar box after not successful firmware. The appearance of the board and chips do not look like one of the options in this topic. WI-FI SV6051P. Accordingly, I can not select the firmware. The prefix with the overwritten loader (the red LED is bright). On the boot flash does not respond, in the Amlogic USB Burning Tool is determined, but the only firmware for this iron, which was able to find here a multi-file. I will be glad to any help in resuscitation of the box. There is a backup from TWRP and it is clear that there was a firmware hx805a-userdebug_4.4.2_KOT49H_20171023_test Help me find one for Amlogic USB Burning ToolClick image for larger version  Name:	image_33415.jpg Views:	1 Size:	111.1 KB ID:	731480

                Comment


                • Originally posted by ra11 View Post

                  i could unsolder the button - see if that makes a difference...
                  - that didnt work.. this box is locked in Restore mode it seems and no matter that i do it wont come out of it. Tried burning too 2.0.2, 2.0.3 and 2.0.8, loads of diff img's, Pin short (4 points on NAND make LED flicker - tried to boot with pin short + Reset in, without etc...) and tried all other regular reset / TWRP Boot to recovery from SD stuff.... feels to be a dead end

                  Comment


                  • Originally posted by ra11 View Post

                    - that didnt work.. this box is locked in Restore mode it seems and no matter that i do it wont come out of it. Tried burning too 2.0.2, 2.0.3 and 2.0.8, loads of diff img's, Pin short (4 points on NAND make LED flicker - tried to boot with pin short + Reset in, without etc...) and tried all other regular reset / TWRP Boot to recovery from SD stuff.... feels to be a dead end
                    Sorry, bad luck, let me look for any help


                    And for neon
                    Please, version of board, model of wifi

                    Comment


                    • Originally posted by mikino View Post

                      Sorry, bad luck, let me look for any help


                      And for neon
                      Please, version of board, model of wifi
                      do you happen to know which pins to short on Nand perhaps please?

                      Comment


                      • Originally posted by ra11 View Post

                        do you happen to know which pins to short on Nand perhaps please?
                        try this one
                        http://piceletro.blogspot.com/ this one at portuguese
                        or this one
                        https://forum.xda-developers.com/and...light-t3553026 this on english

                        hope could help you

                        Comment


                        • As far I can look, is not a s805
                          try this
                          http://freaktab.com/forum/tv-player-...mware-download
                          Looks like rk

                          Comment


                          • Click image for larger version

Name:	IMG_20180616_122644.jpg
Views:	1
Size:	105.5 KB
ID:	731605
                            Originally posted by mikino View Post

                            Sorry, bad luck, let me look for any help


                            And for neon
                            Please, version of board, model of wifi
                            MXQ-805 There is a sticker on the board HXA17103101-02, wi-fi sv6051p
                            Last edited by Neon; 06-15-2018, 23:33.

                            Comment


                            • Originally posted by mikino View Post

                              try this one
                              http://piceletro.blogspot.com/ this one at portuguese
                              or this one
                              https://forum.xda-developers.com/and...light-t3553026 this on english

                              hope could help you
                              Aha! Success on 1 box - revived - thank you!!

                              Comment


                              • Originally posted by ra11 View Post

                                Aha! Success on 1 box - revived - thank you!!
                                your welcome
                                dont forget, if somebody asjk you for help, help him

                                Comment

                                Working...
                                X