Announcement

Collapse
No announcement yet.

!!M8s+ clone and USB Burning Tool problem!!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • !!M8s+ clone and USB Burning Tool problem!!

    Hello
    a friend of mine has an M8s+ clone (M9&M8_8bit_V1.1 2015/09/2 and M8+20160126-V13) and we managed to unbrick it 100% with this rom via sd card method
    (https://mega.nz/#F!y4ZmQZaI!0G8hPIwHmyul4DvCWdkIrA)
    the strange thing is that while it's working with the sd card method we can never managed to use usb tool method !
    always stops in 2% error!
    when untick the "erase bootloader" from usb tool (USB_Burning_Tool_v2.0.5.15-build7) the procedure continues and after the 2% because of the bootloader and ends without problems!
    if we don't untick it we get the same error 2%
    every other attempt with other roms(acemax) either stuck on 2% or if we untick the "erase bootloader" the tv box never starts and must use the sd card method for get it back alive!
    is this normal?
    from the time we can make it working with sd card method why do we get 2% error with usb?
    any help will appreciated!
    thank you!

  • #2
    Hi gatos814 ,


    what says the "Error Message" what kind of Error.Which Windows do u use for flashing ??? Ever tried another Burningtool Version ???

    Did you use the right Rom ??? SDBoot and FlashBoot are different,i think ?

    Change the "Temperature Range" in Flashtool under "View" to 20 to 60*C.

    good luck and report or ask if you need more help.Many can help if they want.


    gefattern

    Comment


    • #3
      Ok , thank you for your reply and i also hope for further help!
      first the error we take is this : "[0X10105002]Romcode/InitializeDDR/Read initialize status/USB Control setup error"
      second we changed the Temperature Range but i don't know how that would help us!
      third now , the 2 roms working with our tv box (one we took it from the forum and the other seller gave us) , are exactly the same (only the dates change) !
      and both of them can not flash via usb tool only with sd card method !!!!!
      now the usb tools we tested are : v2.0.5.15-build7 , v2.0.5.15_build9e , v2.0.6.2_build2 and v2.0.7.2_build2_12 but all gave us the same 2% error and the same message !
      i know more or less that all the same amlogic chip can flash with similar roms (maybe not the clones!) and that in worst senario either will not work the modules (wifi ,ethernet , bluetooth ) or totaly brick the mmc!
      is this common issue with clone tv boxes?
      are anyone else experience the same or similar situations?
      is there a known solution?
      looking forward for more answers!
      thank you!

      Comment


      • #4
        Hi gatos814


        have you tried different USB Cables ??? or another USB Port.What Windows do u use for flashing ???

        Look this Thread Post #33 from criispp contact him with PM ask for explain his unbrick Methode over Recovery.

        If a Temp Error was shown it had helped.The Link has Infos over your Error.Looks like Cable Problem.

        http://forum.xda-developers.com/andr...error-t3321735



        good luck and report

        gefattern

        Comment


        • #5
          2 things mate
          first , we tested it with 2 computers :1 laptop with windows 7 x86 and 2 desktop windows 7 x86 and with 2 different cables and the results always the same!
          now , second i don't see "this Thread Post #33" , no link
          thank you for your time!

          Comment


          • #6
            Hi gatos814 ,

            i am sorry my fault forgot to paste it


            http://freaktab.com/forum/tv-player-...mpletely/page3

            hope this helps.I think you have to write a PM to him , old Thread.


            nice Day


            gefattern

            Comment


            • #7
              Hi gatos814

              it looks you are no newbie but have you pressed for flash the Resetbutton while connecting to PC ???


              gefattern

              Comment


              • #8
                Originally posted by gefattern View Post
                Hi gatos814

                it looks you are no newbie but have you pressed for flash the Resetbutton while connecting to PC ???


                gefattern
                yes mate
                if i don't , we could never have connection!
                all made as it has to be but no results!
                and again from the beginning , my friend's box working but he can not flash the stock rom with usb method only with sd card method!
                and the question why is this happening
                that's all our problem
                thank you!
                Last edited by gatos814; 11-18-2016, 11:10.

                Comment


                • #9
                  Hi gatos814

                  hope you can get it fixed , maybe really the mmc is broken ?



                  good luck


                  gefattern

                  Comment


                  • #10
                    Can you share rom M9&M8_8bit_V1.1 2015/09/2 and M8+20160126-V13. Please

                    Comment


                    • #11
                      Sorry m8
                      My friend has not this tv box anymore so i haven't keep the firmwares!
                      Regards!

                      Comment


                      • #12
                        Originally posted by gatos814 View Post
                        Sorry m8
                        My friend has not this tv box anymore so i haven't keep the firmwares!
                        Regards!
                        thank you.

                        Comment

                        Working...
                        X