Announcement

Collapse
No announcement yet.

X96 Mini TV Box Amlogic S905W + Android 7.1.2 + Quad-core Cortex-A53 + 4K VP9 H.265

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • I am referring to this box which looks exactly like x96 mini. This does not have bluetooth.
    https://www.youtube.com/watch?v=sHG18iUXxRA

    Comment


    • I own this Box and can confirm Mine has bluetooth built in!!

      Comment


      • Originally posted by trebor View Post
        Reset behind the AV port
        Works well for a small package as is
        Maybe not for you then
        trebor is there a reset on the X96 mini? i have one and dont see any...maybe on the bottom?

        Comment


        • Originally posted by soldiaz View Post
          I own this Box and can confirm Mine has bluetooth built in!!
          May be different versions. I purchased this Box two months back. In this box there is no bluetooth.

          Comment


          • I too have to same box as Nambisan and I have been searching these forums for days and tried so many different firmware just trying to get this thing working again. can anyone help with the firmware that will work on it and how to get it on?

            Comment


            • Maybe this Forum will help a little bit... XDA
              Hello, this thread is for our Android TV Box. Here I would like to collect all related firmwares, recoveries, updates, information etc. and discuss with y…

              Comment


              • Found Firmware!

                x96W:

                https://4pda.ru/forum/index.php?show...#entry71939885

                and

                https://4pda.ru/forum/index.php?show...#entry70705831

                Paste URL in Google translator

                please confirm working !

                I opened a thread for this device here:

                http://freaktab.com/forum/tv-player-...05w#post721810

                Please participate there!

                Comment


                • Originally posted by xanadu89897 View Post

                  What are you trying to prove with those links?

                  In the 1st one, it's clearly shown that the image used was a original stock firmware for the X96 Mini. This is what I meant when I said that you can only use an (.img) signed by the manufacturer themselves to flash the targetted box. The aml_upgrade_package.img is an official X96 Mini image which is SIGNED so of course it'll flashed properly.Try using the Tanix image instead and you'll break your box almost immediately after flashing.

                  Click image for larger version

Name:	2i1efwn.png
Views:	1
Size:	232.4 KB
ID:	701817

                  In the 2nd link the Viet user is showing off a ATV version of a ROM but look carefull and you'll see the board he's using is NOT a X96 Mini. The X96 Mini does not have blue colored LED on the right hand side on the front panel. Logic will immediately tell you that's not a X96 Mini.

                  Click image for larger version

Name:	21nh6hw.png
Views:	1
Size:	98.0 KB
ID:	701818Click image for larger version

Name:	205rxxc.png
Views:	1
Size:	106.0 KB
ID:	701819

                  That is also not a X96 Mini controller shown in the video, it is from some other higher end box with an ATV(Android TV) rom.

                  So your point is???
                  Sorry to interfier but manu_man4 is correct there is a ATV rom version for this box, and it runs pretty well i got it running on my X96MINI I SAY AGAIN I GOT THR ATV ROM RUNNING ON MY X96MINI

                  Comment


                  • hello, i have a x96 mini box , and when i try to flash it, it stops at 7% formatting!!! with red led

                    Attached Files

                    Comment


                    • Originally posted by zadryl View Post
                      hello, i have a x96 mini box , and when i try to flash it, it stops at 7% formatting!!! with red led
                      Use the bur card method dont erase bootloader

                      Comment


                      • can you tell me please how? with witch program?

                        Comment


                        • Originally posted by hcardoso483 View Post

                          Use the bur card method dont erase bootloader
                          can you tell me please how? with witch program?

                          Comment


                          • Download amlogic burn card dool on your pc then open the software put the sdcard on the card reader and load the firmware to the burncaed tool becouse you alredy tried to do witn the usb method probably you got no bootloader but just for peace of mind see if your x96mini boots up, if it does untick the erase bootloader option, but ir your box do not boot tick the erase bootkoader option there is option to reboot when finish preas that one and press to make the card, when the soft prompts you that is successfull just place the card to your box wile power is off press the pin inside the av port on the rear of the box at the same time connect the power cable blue light should come up and you will see a green android on screen below a bar you can release the pin now, the bar will be growing green wait for it to finish it may take a wille, when it starts too boot wait it will take so 7 to 15 minutes to first boot other boots after the first one are much faster, now there is another android tv rom that is functional and itmay be better than this one https://mega.nz/#!nN5XTLAS!GrJBSPpnG...IHAACmegWJlodE i've been playing with it for a few days and its good you can find the thread http://freaktab.com/forum/tv-player-...-roms-tools-bx let meknow if you got it ok, good luck

                            Comment


                            • Originally posted by hcardoso483 View Post
                              Download amlogic burn card dool on your pc then open the software put the sdcard on the card reader and load the firmware to the burncaed tool becouse you alredy tried to do witn the usb method probably you got no bootloader but just for peace of mind see if your x96mini boots up, if it does untick the erase bootloader option, but ir your box do not boot tick the erase bootkoader option there is option to reboot when finish preas that one and press to make the card, when the soft prompts you that is successfull just place the card to your box wile power is off press the pin inside the av port on the rear of the box at the same time connect the power cable blue light should come up and you will see a green android on screen below a bar you can release the pin now, the bar will be growing green wait for it to finish it may take a wille, when it starts too boot wait it will take so 7 to 15 minutes to first boot other boots after the first one are much faster, now there is another android tv rom that is functional and itmay be better than this one https://mega.nz/#!nN5XTLAS!GrJBSPpnG...IHAACmegWJlodE i've been playing with it for a few days and its good you can find the thread http://freaktab.com/forum/tv-player-...-roms-tools-bx let meknow if you got it ok, good luck

                              hello,

                              many thanks for your help, i'll try it and tell you results

                              Comment


                              • Originally posted by zadryl View Post


                                hello,

                                many thanks for your help, i'll try it and tell you results
                                hello,

                                i've tried this method with sdcard, but the upgrading bar stops at the begining . should i do something else?
                                Attached Files

                                Comment

                                Working...
                                X