Announcement

Collapse
No announcement yet.

S905X Android 8.0 Oreo (Tested on Mini M8S II. Possibile to work on other GXL/S905X boxes. Testing needed! "WIP")

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Hi!
    for testing, I found that for players MX Player does not use hardware decoder. will write "HW not supported". Is there a solution?
    Thank you

    Comment


      Originally posted by bergerov View Post
      Hi!
      for testing, I found that for players MX Player does not use hardware decoder. will write "HW not supported". Is there a solution?
      Thank you
      On the Le Potato SBC MX player HW+ is working without bugs. So shouldn't be from this build. See attached.

      Comment


        HW + works but not HW. In HW +, AC3 and DTS do not work through hdmi AV. receiver. HW + does not support passthrough.

        it's not a hardware problem, the Android 6 HW decoder has worked
        Last edited by bergerov; 05-03-2018, 20:16.

        Comment


          Very nice ROM, but unfortunately no Wifi stick is working, but some apps require Wifi. Is an update for Wifi possible via OTA? Thank you for great work.

          Comment


            Originally posted by Jgon View Post
            Levy ROM works nicely on the Le Potato S905X CC (LibreComputer).
            Does anyone know which WIFI dongle to use?
            For the developer, could you compile with more wifi hardware options. I have some WIFI USB dongles but none seems to work out on the Le Potato.

            Hey! Nice work with this rom. But I have a problem. My device is AML-S905X-CC le Potato from libre computer.
            When I flash this rom on EMMC module, my first boot works fine. However, when I turn off the system, it doesn't reboot anymore. I have no signal on my screen. An idea?
            Thx !!

            TitQuentin
            Last edited by TitQuentin; 05-18-2018, 12:57.

            Comment


              Did not install and gave the 2% error.

              [16:06:13 370][HUB3-3][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error

              Has anyone who got that error been able to install?

              Comment


                I apologize if this has been covered and I have failed to spot it...

                I have been using my Mini m8s II without problems for ages now, but it has started to pop a message after boot saying "Google Play Store has stopped" which I OK and carry on, but I can no longer get updates for apps like VLC, Chrome etc etc

                I have asked elsewhere on this site, but still don't understand:

                1) Whether this Oreo build will work with my box (I use a remote microsoft RF mouse with a micro-dongle, and just use VLC to play material from a RAID box on my (wired ethernet) LAN into a basic HDTV via HDMI - so nothing unusual or complicated I'd say. I don't use wifi, but I do use BT sometimes.

                2) How to fully back up my existing config or restore the firmware if I brick the unit while trying to upgrade it. I don't have an installation image anymore, for the current software, but I recall copying an image on the microSD card a year ago....

                My unit is a minim8s II 2G + 8G with S905X. I am on ROM1.06 and f/w build "p212-user debug 6.01 MHC19J 20161013 test keys", and my device was bought in Aug 2016. It has a diagonal grey log on the case that says "MiniM8S". I am not sure if it is the older PCB or newer type; both seem to exist. Can't open the unit right now.

                Any advice gratefully received....!

                Comment


                  its posible to flash this on a t95m/2gb ram, with the s905x?

                  Comment


                    Originally posted by bergerov View Post
                    HW + works but not HW. In HW +, AC3 and DTS do not work through hdmi AV. receiver. HW + does not support passthrough.

                    it's not a hardware problem, the Android 6 HW decoder has worked
                    try MX Player Pro 1.9.19 (Patched/AC3/DTS Mod Lite)

                    Comment


                      Hi! yes I always use it. This rom does not support hw ac3.

                      Comment


                        having a hard time to try put wifi codes in this rom..anyone have any luck yet

                        Comment


                          Tried installing it on a "Sammix r95" box (Amlogic s905x chipset, p212 board). Seems to install properly with provided burning tool yet when I try to boot all I get is a black screen. No Android logo or anything at all. Tried pulling the power and restarting and met with the same results. Tried to boot into recovery and the same results. Any suggestions as to how I can make this work?

                          Comment


                            burn card maker and the img for your box will get you back up and running ..or USB_Burning_Tool and just jump your chip

                            Comment


                              what custome tool you use on this software

                              Comment


                                Originally posted by Cleve View Post
                                Tried installing it on a "Sammix r95" box (Amlogic s905x chipset, p212 board). Seems to install properly with provided burning tool yet when I try to boot all I get is a black screen. No Android logo or anything at all. Tried pulling the power and restarting and met with the same results. Tried to boot into recovery and the same results. Any suggestions as to how I can make this work?
                                The DTB in Lewy's Oreo image only supports boxes with 2GB of RAM. Since your box only has 1GB, you have to change the DTB to the one I posted earlier in this thread.

                                Comment

                                Working...
                                X