Announcement

Collapse
No announcement yet.

MXIII - G II TV Box Amlogic S912 Octa-core

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • I think that my MXIII G2 it's bricked, i connect the ac and the only that i get it's a black screen, on hdmi and rca

    i can't do the sd card method, also the usb burner

    i connect to a usb serial converter and the only that i get it's

    Code:
    GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
    TE: 158626
    
    BL2 Built : 19:58:22, Aug 31 2016.
    gxl g54c8aee - xiaobo.gu@droid05
    
    set vdd cpu_a to 1120 mv
    set vdd cpu_b to 1050 mv
    set vddee to 1000 mv
    Board ID = 1
    CPU clk: 1200MHz
    DQS-corr enabled
    DDR scramble enabled
    DDR3 chl: Rank0+1 @ 912MHz - PASS
    Rank0: 1024MB(auto)-2T-13
    Rank1: 1024MB(auto)-2T-13
    DataBus test pass!
      ADDR-W[0x00008000]:0xaaaaaaaa,R:0xe8b28518
      ADDR3-W[0x00000004]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00000008]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00000010]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00000020]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00000040]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00000080]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00000100]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00000200]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00000400]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00000800]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00001000]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00002000]:0x55555555,R:0x174d7ae7
      ADDR3-W[0x00004000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x00008000]:0x55555555,R:0xe8b28518
      ADDR2-W[0x00010000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x00020000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x00040000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x00080000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x00100000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x00200000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x00400000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x00800000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x01000000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x02000000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x04000000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x08000000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x10000000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x20000000]:0x55555555,R:0x174d7ae7
      ADDR2-W[0x40000000]:0x55555555,R:0x174d7ae7
    AddrBus test failed!!!
    there it's a way to short pin to short the nand?

    thanks in advance

    Comment


    • This may potentially be of assistance.

      http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s912/645787-h96-pro-plus-short-pin-unbrick-help
      MXIII-G II, Chuwi Hibox, Nvidia Shield, NUC6CAYH

      Comment


      • Originally posted by BLeaCHeR View Post
        I think that my MXIII G2 it's bricked, i connect the ac and the only that i get it's a black screen, on hdmi and rca

        i can't do the sd card method, also the usb burner

        i connect to a usb serial converter and the only that i get it's

        Code:
        GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
        TE: 158626
        
        BL2 Built : 19:58:22, Aug 31 2016.
        gxl g54c8aee - xiaobo.gu@droid05
        
        set vdd cpu_a to 1120 mv
        set vdd cpu_b to 1050 mv
        set vddee to 1000 mv
        Board ID = 1
        CPU clk: 1200MHz
        DQS-corr enabled
        DDR scramble enabled
        DDR3 chl: Rank0+1 @ 912MHz - PASS
        Rank0: 1024MB(auto)-2T-13
        Rank1: 1024MB(auto)-2T-13
        DataBus test pass!
        ADDR-W[0x00008000]:0xaaaaaaaa,R:0xe8b28518
        ADDR3-W[0x00000004]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00000008]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00000010]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00000020]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00000040]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00000080]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00000100]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00000200]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00000400]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00000800]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00001000]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00002000]:0x55555555,R:0x174d7ae7
        ADDR3-W[0x00004000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x00008000]:0x55555555,R:0xe8b28518
        ADDR2-W[0x00010000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x00020000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x00040000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x00080000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x00100000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x00200000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x00400000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x00800000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x01000000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x02000000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x04000000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x08000000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x10000000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x20000000]:0x55555555,R:0x174d7ae7
        ADDR2-W[0x40000000]:0x55555555,R:0x174d7ae7
        AddrBus test failed!!!
        there it's a way to short pin to short the nand?

        thanks in advance
        If you instal via a PC problem can make short metal part that goes into the OTG port. At the same time, getting the power cable, OTG cable and push a button in AV input.

        Comment


        • Originally posted by gale View Post

          If you instal via a PC problem can make short metal part that goes into the OTG port. At the same time, getting the power cable, OTG cable and push a button in AV input.
          Let me understand:

          wich part i must to short ?

          Click image for larger version

Name:	ca94ee6f-56f3-4add-9a9b-acb9e583a6a0.jpg
Views:	2
Size:	112.6 KB
ID:	671266

          after that i must conect the otg cable to the computer annd finaly push the reset button?

          thanks in advace
          Attached Files

          Comment


          • This part is short. It is best to open the tv box.
            Attached Files
            Last edited by gale; 09-17-2017, 15:43.

            Comment


            • sorry, i can't undertstand cleary, did you reffer that cable must be short (refering to length) or are refering to another kind of short (like electrical short)?

              thanks in advace for your help

              Comment


              • same problem , can any one help us please

                Comment


                • hi

                  i have a bricked MXIII GII , light blue always turned on , i tried usb burning tool , but stuck at 7% , i tried a bootable sd card prepared with burn card maker and all that i have is the same black screen no signal on the tv .

                  https://www.youtube.com/watch?v=RfNwYjF78Hk

                  anyone have an alternative solution please ?

                  Comment


                  • Hello everyone,
                    i need to know if someone test any wireless gamepad on this box(with stock rom)?

                    Comment


                    • Hi,
                      I have an mxiii gii S912 as well. I am pretty sure that the internal storage is failed, and some of you have the same problem (burning tool fails at 7% and some scratched black and white android logo was also familiar which appears when you try to reflash from sdcard)

                      I think we can't repair this box, but If we can boot from sdcard then we can use libreELEC for kodi which can boot from sdcard (or maybe somebody can give a method how to extract the stock firmware to sdcard)
                      Use that if you can and don't try repair your box with burning tool as I did

                      My problem (and some of yours) that we can't boot from sdcard (no boot loader, no any signal on tv)
                      I saw a video on youtube where somebody could boot from sdcard with an other box which was in the same condition, using the short pin method.

                      So we have hope, if somebody someday can figure out which pins should we shorten (and maybe soldering?, to force the box to use sdcard on every boot)

                      But at this point I can't even figure out which chip is the nand chip

                      Comment

                      Working...
                      X