Announcement

Collapse
No announcement yet.

H96 pro + Ultra 4k

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Hello,
    i have the same box and sv4a atv rom work not like the s32V6 but is working.
    i have the ZH01-S912-TVBOX-V3.0 and the S32-V6 with THE ATV ROM

    Thank you Superceleron

    Comment


    • #47
      Originally posted by Abdel313 View Post
      Hello,
      i have the same box and sv4a atv rom work not like the s32V6 but is working.
      i have the ZH01-S912-TVBOX-V3.0 and the S32-V6 with THE ATV ROM

      Thank you Superceleron
      Abdel313 ,

      Could you please tell me how you installed the SV4a ROM to the ZH01-S912-TVBOX-V3.0 ?Hi
      Last edited by Mss81; 02-04-2018, 00:39.

      Comment


      • #48
        Hello Mss81,
        have you try my method? with sd card burning

        Comment


        • #49
          Originally posted by Abdel313 View Post
          Hello Mss81,
          have you try my method? with sd card burning
          Hi Abdel313,

          Not yet found the time. But I did receive a new firmware image for this box, which I got from Gearbest which I will use in case something goes wrong. I will try to update this weekend and also will post the image file in this thread.
          I will keep you posted.

          Comment


          • #50
            Originally posted by Mss81 View Post

            Hi Abdel313,

            Not yet found the time. But I did receive a new firmware image for this box, which I got from Gearbest which I will use in case something goes wrong. I will try to update this weekend and also will post the image file in this thread.
            I will keep you posted.
            I Also Has The Same Box ,And Looking For The Original ROM For a Long Time.Would be greatlly appreciated if you provide the link for the ROM that Gearbest sended to you ! thanks in advance.

            Comment


            • #51
              Originally posted by Mss81 View Post

              Hi Abdel313,

              Not yet found the time. But I did receive a new firmware image for this box, which I got from Gearbest which I will use in case something goes wrong. I will try to update this weekend and also will post the image file in this thread.
              I will keep you posted.
              Hi Mss81, if you have a new firmware for pcb ZH01-S912-TVBOXv3.0, I think you could put link to try it. This box has not any firmware more to try.

              Comment


              • #52
                Originally posted by marponz View Post

                Hi Mss81, if you have a new firmware for pcb ZH01-S912-TVBOXv3.0, I think you could put link to try it. This box has not any firmware more to try.
                Hi marponz ,

                I did get a link and instructions to flash it through USB burner, but that didn't work. Then I applied a version from September through USB burner which did work which I can use as backup for this box:

                But after flashing this firmware I did successfully flash Supercelerons ATV rom SCV1 through SD card (using Burncard Maker). Initially the flashing stopped at the very beginning, but the I kept the reset button pushed during the whole flashing process. Eventually the box rebooted, but the screen was flickering --> this was fixed by reconnecting the HDMI cable.

                The SCV1 worked smoothly and had no big issues, I only didn't like the interface. So I applied the SCV4 OTA update through TWRP (just put the OTA zip unpacked on a SD card, boot into TWRP recovery and apply the update).

                This is also working fine now, only just during the first boot the system was unresponsive for a long time and I had to uninstall the google play store updates.

                So on this SCV4 all is working OK:
                - WIFI
                - Ethernet
                - Bluetooth
                - HDMI CEC
                - NO randoms reboots and NO freezes

                Only thing not working is the Power on from full shutdown. I have to unplug the power and reconnect it again. (By default the box goes into sleep mode which is fine as well,restart with HDMI CEC or remote)

                But overall the SCV4 version is far much better than the stock rom Wisdom version.

                Comment


                • #53
                  Thanks Mss81 for your explanation. Did you put this frimware?

                  Download SCV4A OTA:Download SCV1 GREEN PCB IMG:because I tried this one , and not run in my device. My device showed me four colours cicles moving, but not run.
                  I tried it with pc. I did not try this one with burn card maker.

                  Comment


                  • #54
                    Yes. That's it.
                    ALFAWISE H96 Pro+ 3/32 (S32-V6) | 7.1.2 | SCV7A | OC kernel | TWRP 3.1.1-0 | 64GB

                    Comment


                    • #55
                      Originally posted by marponz View Post
                      Thanks Mss81 for your explanation. Did you put this frimware?

                      Download SCV4A OTA:Download SCV1 GREEN PCB IMG:because I tried this one , and not run in my device. My device showed me four colours cicles moving, but not run.
                      I tried it with pc. I did not try this one with burn card maker.
                      Hi marponz,

                      Yes that's the firmware. The screen with the circles moving did indeed take a long time. But let it run, it should boot. I also almost gave up as well but after about 10/15 minutes it moved to the setupwizard.

                      Comment


                      • #56
                        Hi Mss81,

                        it's good to know, my method works with your box.
                        but i have flash an old version of stock rom at first.
                        thanks to shonk

                        Comment


                        • #57
                          Hi, I have the H96 pro + box w/ green PCB ZH01-S912-TVBOX-V3.0 and 2 USB ports. The date on the PCB is 22-09-2017. I got this TV box from lightinthebox.com and it comes with android 6.0. After using the TV box a few times, it freezes a lot and the box is very buggy. Now it won't start up anymore. The blue power LED flashes only briefly (<1sec) when the AC power cable is plugged in, SPDIF led is constantly on though (red) and it only shows the H96 bootscreen when I power the TV box.

                          So I tried flashing the box with new firmware using USB burning tool v_2.0.8. Several AML android v7.1.2 firmwares gave me an error during the process of flashing the ROM, it got stuck at 4% and gave Enum device error. In this thread I saw that Mss81 managed to flash the TV box with firmware from September (s912_q9377-H96_KDMC17.3_50ME_600M_mac-20170918). I downloaded the same firmware and flashed my TV box with USB burning tool. This time it worked and flashed the TV box with 100% complete. However, when I connect the box with my TV it gives the same results and it looks like flashing the new ROM did not even happen. It still freezes on the boot up screen, displaying only the H96 logo with no blue power LED burning. I have switched the power supply as well to a V5 with 3A adapter, but it still won't work.

                          Then I also tried the method of flashing with SD card. I used Burncard maker 2.0.2 and tried flashing with s912_q9377-H96_KDMC17.3_50ME_600M_mac-20170918 and SCV1-ATV-A7.1.2-x64-Alfawise.H96.ProPlus.img (Green PCB). The issue is that my TV box won't even go into SD card boot mode. I hold the reset button down with a paperclip, plug in the power supply while still holding the reset button down but my TV box just boots up to the H96 bootscreen and nothing happens. So I'm really clueless about what I can do to make my TV box work. I hope someone can help me out and let me know if I need to provide more info.

                          Comment


                          • #58
                            Hi doraemon23,

                            Do you know if you flashed with the "erase bootloader" option? If not, please reflash with this option.

                            Else I read on the forum to try with a different power adapter.

                            Comment


                            • #59
                              Hi Mss81 , I flashed with the "Erase bootloader" and "Erase flash" boxes ticked. I also tried flashing LibreElec to the box. With the LibreElec SD card I do manage to get into the SD card bootmode and the LibreElec bootscreen starts up and it's installing (haven't succesfully installed though). I am already using a different power adapter then the original provided power adapter that came along with the H96 pro plus. My power adapter is 5V with 2.5A from what I have seen that should be enough power, if not what would you (or someone else) recommend in terms of voltage and current output? Thanks a lot.

                              Comment


                              • #60
                                Originally posted by Mss81 View Post

                                Hi marponz ,

                                I did get a link and instructions to flash it through USB burner, but that didn't work. Then I applied a version from September through USB burner which did work which I can use as backup for this box:

                                But after flashing this firmware I did successfully flash Supercelerons ATV rom SCV1 through SD card (using Burncard Maker). Initially the flashing stopped at the very beginning, but the I kept the reset button pushed during the whole flashing process. Eventually the box rebooted, but the screen was flickering --> this was fixed by reconnecting the HDMI cable.

                                The SCV1 worked smoothly and had no big issues, I only didn't like the interface. So I applied the SCV4 OTA update through TWRP (just put the OTA zip unpacked on a SD card, boot into TWRP recovery and apply the update).

                                This is also working fine now, only just during the first boot the system was unresponsive for a long time and I had to uninstall the google play store updates.

                                So on this SCV4 all is working OK:
                                - WIFI
                                - Ethernet
                                - Bluetooth
                                - HDMI CEC
                                - NO randoms reboots and NO freezes

                                Only thing not working is the Power on from full shutdown. I have to unplug the power and reconnect it again. (By default the box goes into sleep mode which is fine as well,restart with HDMI CEC or remote)

                                But overall the SCV4 version is far much better than the stock rom Wisdom version.
                                Did you erase the bootloader for this method to work?
                                Was your progress bar and android Logo Grey kinda weird looking when you did it?

                                I have the wisdom version BTW

                                I just tried with erase bootloader off, and i got the above mentionned grey progressbar, it goes once across the screen and a second bar inside it for a bit and then nothing.

                                thanks!

                                Comment

                                Working...
                                X