Announcement

Collapse
No announcement yet.

[ROM] AlfaWise H96 PRO+ 3/32 and 3/16 - SCV2 ROM (DDR3 ONLY)

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by superceleron View Post

    Hooo wifi, this one is only for QCA9377(LTM8830) chip
    In case i would loose wifi only it is not issue for me since LAN cable provides the network.
    Trying to make sure if RAM module is DDR3 or not... I will provide some RAM closeup in case no exact evidence.
    Thank you for your prompt answers.

    Comment


    • Originally posted by H96ProNOTplus_3_16_q6330 View Post

      In case i would loose wifi only it is not issue for me since LAN cable provides the network.
      Trying to make sure if RAM module is DDR3 or not... I will provide some RAM closeup in case no exact evidence.
      Thank you for your prompt answers.
      Hi,

      Hardware info: KLMAG2GE4A-A001 eMMC flash, two SpekTek PE025-125 F1622 RAM chips and two SpekTek PE039-125 TP RAM chips, Pulse H5007NL and Realtek RTL8211F transceiver for Gigabit Ethernet, and AP6255
      Exactly the same as in http://www.cnx-software.com/2016/10/...-and-teardown/ , but with H96 Pro plastic body.
      Could you please help me to confirm based on that i can safely flash superceleron rom? (I dont care if wifi/bt not works at all.)

      Comment


      • About [ROM] AlfaWise H96 PRO+ 3/32 and 3/16 - SCV2 ROM (DDR3 ONLY)
        Will This Version Firmware TWRP work with root magisk ??

        Michael T.
        3.0.x Lollipop firmware RK3288 By Wasser/ My Standard Remote IR
        CVSB-K200-Wireless Mini QWERTY Keyboard / Motion Mouse for Android RF
        Rii Mini i25 Qwerty Keyboard/Motion Mouse For Android RF
        Media Flow Suite ... 24 TB ReadyNas Pro wired 1 GB Ethernet

        Comment


        • Hey superceleron I installed this ROM today and it's amazing. You've done incredible work! I am just wondering, did you manage to get a fix for the IR remote power button? Would replacing the remote.conf with stock work? Perhaps the vendor keylayouts as well? Thanks in advance!

          Comment


          • superceleron
            superceleron commented
            Editing a comment
            The power button problem is only on some boxes and is a hw problem, mine have it and some others that was sold how many dunno...
            And that wont fix it!

        • Hi.
          This rom works in Alfawise H96 Pro+ TV Box 3GB RAM + 64GB ROM?
          Thanks

          Comment


          • Originally posted by luffy76 View Post
            Slt,


            Originally posted by Valek View Post "merci à lui"

            Install firmware with a microSD card

            STEP 1 (download and extract).
            Download :

            Burn Card Maker and firmware

            Extract "TF.rar" and firmware in the same folder.
            Now you get "Burn_Card_Maker.exe" and firmware file.


            Rename le firmware update.img

            Put a microSD card in your computer (on Windows) and go to the second step.

            STEP 2 ("make" the microSD card)
            Run "Burn_Car_Maker.exe"
            The first time it's in chinese, click on the top lef menu, click on the second option, check "English" and put "OK".
            Close and restart "Burn_Car_Maker.exe"
            Chose disk: (Letter of your microSD card)
            "YES" must be check 3 times for "To Partition and Format", "erase_flash" and "Reboot" (erase_bootloader must be uncheck).
            Click on "Open" and chose firmware img.
            Click on "Make", format the microSD card (default settings), after that the rom copy begin on the microSD card, when it's done you get a "Success" message.

            STEP 3 (installation)
            Now, insert the microSD card in the device (power supply unplug/off).
            Let your TV on and the HDMI cable plugged.
            With a paper clip or other, press the reset button and hold it (small hole under the box), in the same time plug the power supply on the Beelink GT1.

            Cdt,
            Will this work on the MadCatz Mojo?

            Comment


            • Hi guzs i NEED HELP, i was trying to update the Firmware and i tick the box Erase Bootloader !! now my H96 3/32 pro dosent event reset i think it crushed i donnt know i have the blue light it stays on but nothing on TV ... do you know what i should do ?

              Comment


              • Hi
                I tried to update the firmware with burning tool, but it's stuck on 4% (download UBOOT) with the error:
                [Err]--[0x10303004]Romcode/Switch status/Identify/Error result

                Do you know what can I do?

                Thanks

                Comment


                • Hi all,

                  I tried to change to this rom with sdcard and the box is stuck in upgrading message.......... You have any idea?

                  Model : H96 pro + 3 Ram / 32 Rom - 7.1.2

                  Thanks

                  Comment


                  • what kind of 7.1.2 rom? original? scv4?
                    normaly all version from 7.x.x are working on ddr3 and ddr4 boxes.
                    for a while i flashed a ddr4 box with the wrong firmware (6.x.x) and it stuck at 7%.
                    the box was dead, and no more flashing was possible. (enter recovery not possible, any more)
                    did you tried to flash an other version? did it stuck at the same part?
                    please try the burn card maker and scv4.
                    good luck.

                    (without any warranties! please read the form carefully before you do the next. my info
                    is only theorie and i have never tried it. it could be extremely wrong. on my question
                    how to use the OTG, i never became an answear. but there are not so many ways
                    to use OTG...)

                    if sd card burner will not work, do you can try to flash it via OTG usb and the USB burning tool.
                    i dont know where the otg port is. maybe between 2 big usb ports. look at the pcb.
                    cut an old usb cable, check pcb with a multimeter the outer pins für 5v and ground, check colors on the usb cable to check what 5v and ground is.
                    solder it, and the inner 2 cables are the data cables. there are only to possibillities to solder it-... lol
                    i dont have experience with this tool. please read the forum for details.
                    and let me know if you gut success..
                    DO IT ON YOUR OWN RISK.
                    SEARCH THE FORUM FOR MORE INFOS

                    Comment


                    • Originally posted by DOMin8or View Post
                      what kind of 7.1.2 rom? original? scv4?
                      normaly all version from 7.x.x are working on ddr3 and ddr4 boxes.
                      for a while i flashed a ddr4 box with the wrong firmware (6.x.x) and it stuck at 7%.
                      the box was dead, and no more flashing was possible. (enter recovery not possible, any more)
                      did you tried to flash an other version? did it stuck at the same part?
                      please try the burn card maker and scv4.
                      good luck.

                      (without any warranties! please read the form carefully before you do the next. my info
                      is only theorie and i have never tried it. it could be extremely wrong. on my question
                      how to use the OTG, i never became an answear. but there are not so many ways
                      to use OTG...)

                      if sd card burner will not work, do you can try to flash it via OTG usb and the USB burning tool.
                      i dont know where the otg port is. maybe between 2 big usb ports. look at the pcb.
                      cut an old usb cable, check pcb with a multimeter the outer pins für 5v and ground, check colors on the usb cable to check what 5v and ground is.
                      solder it, and the inner 2 cables are the data cables. there are only to possibillities to solder it-... lol
                      i dont have experience with this tool. please read the forum for details.
                      and let me know if you gut success..
                      DO IT ON YOUR OWN RISK.
                      SEARCH THE FORUM FOR MORE INFOS
                      What are you replying to?

                      Comment


                      • Hi.
                        Can I get the last working RGB fix application as a separate installation file?

                        Thanks

                        Comment


                        • Originally posted by bodrick View Post
                          Hi.
                          Can I get the last working RGB fix application as a separate installation file?

                          Thanks
                          Nop, that app only works with my custom kernel, so theirs no use on other roms!

                          Comment


                          • hey bro, can working with unbrand h96 pro plus????
                            btw what scv2 rom???
                            can ask something how working play game using usb gamepad dual shock 3 or 4, usually i play it with connection bluetooth.

                            Comment


                            • Just a request or query: I presume if the filename of the ROM does not specifically mention the wifi chip (9337 or 6330), the Firmware is ok to be used on generic H96Pro+?


                              Sent from my iPhone using Tapatalk

                              Comment

                              Working...
                              X