Announcement

Collapse
No announcement yet.

[ROM] AlfaWise H96 PRO+ 3/16Gb - 3/32Gb - 3/64Gb - SCV7A 7.1.2 (DDR3/DDR4 and 9377 Wifi Chipset)

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • I just installed it using the usb burning tool, then put the OTA on a usb drive and flashed it, no issues at all, super straight forward and seems to work better than then stock image that came with my Generic h96Pro Plus

    NOTE: needed to add the magic root thingie in able to be able to actually use the reboot and some other functions

    Way to go
    Last edited by thewebexpert; 02-10-2018, 12:01.

    Comment


    • Anyway of connecting a WiFi dongle?

      Comment


      • Don't think so. Kernel would have to be compiled with drivers for the dongle.
        ALFAWISE H96 Pro+ 3/32 (S32-V6) | 7.1.2 | SCV7A | OC kernel | TWRP 3.1.1-0 | 64GB

        Comment


        • Just registered to say thanks to Celeron for some awesome work.
          Saving me a real hassle even having to look into this myself.
          The original firmware is utter crap, but this rom that you've developed is amazing.

          Thanks a lot for your hard work man!

          Comment


          • Originally posted by ch3mn3y View Post
            Don't think so. Kernel would have to be compiled with drivers for the dongle.
            I was having problems with the wifi signal. The box said the network was out of range. I connected a wifi dongle with Mediatek chip and apparently it worked. There was a good gain in the reception and the network manager shows two networks with the same name, one of which is out of reach.

            Comment


            • hi guys, sorry to ask a bit of a dumb question - but I'd like to know how to update to the V7 OTA update which is on the front page?

              I downloaded the V4 img as it was a single image file, and installed onto my H96 Pro+ via USB Burning Tool. It installed no probs. I would have done the V7A but noticed there was multiple files so wasn't sure how to properly burn it straight onto the device? Once loaded, I tried to do OTA update but it came up with an error "Check Failed! Check Your OTA Server Agent".

              I have copied the V7A download onto an SD Card - do I install from an app within the device?

              Comment


              • Originally posted by ptyson View Post
                hi guys, sorry to ask a bit of a dumb question - but I'd like to know how to update to the V7 OTA update which is on the front page?

                I downloaded the V4 img as it was a single image file, and installed onto my H96 Pro+ via USB Burning Tool. It installed no probs. I would have done the V7A but noticed there was multiple files so wasn't sure how to properly burn it straight onto the device? Once loaded, I tried to do OTA update but it came up with an error "Check Failed! Check Your OTA Server Agent".

                I have copied the V7A download onto an SD Card - do I install from an app within the device?
                Best to run the update directly from within TWRP. Long press the reset button with a toothpick or something similar until the box boots into twrp. Then flash the zip from within TWRP to update. Then clear the cache/dalvik cache and reboot.

                Comment


                • MY H 96 pro(only) round corners box has stopped to H 96 PRO on the screen. I was trying to update tp 17.6. Has any member met the same fault where I can obtain a tuto on how to redress the situation. Update via SDcard or USB ? Please refer me to a post where I can obtain a solution. Thanks.

                  Comment



                  • @ kwabh,

                    I think your are flashing your box with the wrong firmware. H96 pro is a different hardware China Box.

                    Try this forum: http://freaktab.com/forum/tv-player-...fi-gig-lan-bt4



                    Possible links to newer firmware...research and use at your own risk...

                    https://www.chinagadgetsreviews.com/...ro-tv-box.html

                    https://www.entertainmentbox.com/lat...id-nougat-7-1/

                    Comment


                    • I have a general question: how would we know if there is a new version of the FTMC software?

                      Comment


                      • Anyone know if there is a way to get google cast to work?

                        Comment


                        • Unfortunately if it doesn't work than it won't. It's not just a mod or app thing.
                          ALFAWISE H96 Pro+ 3/32 (S32-V6) | 7.1.2 | SCV7A | OC kernel | TWRP 3.1.1-0 | 64GB

                          Comment


                          • @ ziquilix,

                            Top tab of Freaktab web page....Freaktab Media Center :
                            http://freaktab.com/forum/tv-player-...jarvis-16-2-31

                            Comment


                            • ReaperMan thanks a lot.

                              Comment


                              • Hey guys, many problems with the latest firmware. No more hdr to sdr and sdr to hdr option, bad menu translations, no Dolby truthd 7.1 and Dolby atmos audio pass-through in kodi. Have someone somethings like a solution?
                                Last edited by cdp24; 02-16-2018, 06:40.

                                Comment

                                Working...
                                X