Announcement

Collapse
No announcement yet.

Umbrick H96 Pro Dongle

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Umbrick H96 Pro Dongle

    Hello guys, how to recover H96 Pro Dongle locked / does not start?

  • #2
    Originally posted by jcmacedo5 View Post
    Hello guys, how to recover H96 Pro Dongle locked / does not start?
    Hi ,

    some more Information would be helpful , is it yours , what happend , did you check the Powersupply ???

    Maybe it is possible to flash a new Stockrom ??? , do you have one ??? ever flashed a Device ???

    greetings / gefattern

    Comment


    • #3
      I have experience in flashing roms, however as the box tv has no power button, stayed that doubt.

      Comment


      • #4
        Why do You need Power button to flash firmware? It's not needed. Reset button may be helpful, but not power one.
        ALFAWISE H96 Pro+ 3/32 (S32-V6) | 7.1.2 | SCV7A | OC kernel | TWRP 3.1.1-0 | 64GB

        Comment


        • #5
          I just want to know what procedure to recover the box H96 Pro, it does not matter whether or not it has power button, but the case of the button and that on some devices if it uses it to enter fastboot mode

          Comment


          • #6
            Originally posted by jcmacedo5 View Post
            Hello guys, how to recover H96 Pro Dongle locked / does not start?
            A proven method for flashing the microSD card.
            This method is suitable for cases where the PC does not see the TV box.
            1. Program required - Burn_Card_Maker and the 8gb 10class card.
            2. Map in PC and formatting in fat32.
            3. Run the program.
            4. Choose a memory card and put a check mark:

            #


            5. Rename the firmware in "update", click "open" and paste.
            6. Click on "make", there will be a format request, agree. After the format and closing of the window, the registration process will begin. (about 15 minutes).
            7. A confirmation of the end of registration is a pop-up window (wait patiently), press "ok" and close the program.
            The whole map is ready! We paste it in the TV box. we tighten the reset and supply power. There will be a green line with the boot process, releasing the reset.
            We are waiting for the full firmware upload and at the time of restart we extract the memory card.
            Well, and then just patience (downloading one long), and have fun using it!

            Comment


            • #7
              Where is the dongle reset button?

              Comment


              • #8
                jcmacedo5
                Maybe here?
                ALFAWISE H96 Pro+ 3/32 (S32-V6) | 7.1.2 | SCV7A | OC kernel | TWRP 3.1.1-0 | 64GB

                Comment

                Working...
                X