Announcement

Collapse
No announcement yet.

Help me please erro [0x30405004] USB burning tool

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Please install u-boot.bin.sd.bin first on the MicroSD card, see the instructions -> “METHOD 3 – Update from a MicroSD Card“

    You need to do the first 2 steps for now.

    You can download u-boot.bin.sd.bin for your box HERE. In the ZIP archive there are 2 u-boot binary files, u-boot.bin will be needed later for the eMMC installation.

    If you have prepared the sdcard, put it in the box, and try to boot the box first, you do not have to press anything, because the bootloader partition is empty and the BL1 starts the BL2 code directly from the sdcard. Please post the bootlog after booting.

    Comment


      #32
      Ok, I make micro sd card with u-boot.bin.sd.bin, here is the bootlog:

      GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:2;RCY:0 ;USB:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
      no sdio debug board detected
      TE: 146208

      BL2 Built : 20:32:17, Sep 8 2017.
      gxl g6296b83 - xiaobo.gu@droid12

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      DDR3 chl: Rank0+1 @ 912MHz - FAIL
      DDR3 chl: Rank0 @ 912MHz - FAIL
      DDR3 chl: Rank0 16bit @ 912MHz - FAIL
      DDR4 chl: Rank0+1 @ 912MHzGXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:2 ;RCY:0;USB:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0 ;
      no sdio debug board detected
      TE: 146107

      BL2 Built : 20:32:17, Sep 8 2017.
      gxl g6296b83 - xiaobo.gu@droid12

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      DDR3 chl: Rank0+1 @ 912MHz - FAIL
      DDR3 chl: Rank0 @ 912MHz - FAIL
      DDR3 chl: Rank0 16bit @ 912MHz - FAIL
      DDR4 chl: R▒▒+1 @ 912MHzecGXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC :2;RCY:0;USB:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK :0;
      no sdio debug board detected
      TE: 146126

      BL2 Built : 20:32:17, Sep 8 2017.
      gxl g6296b83 - xiaobo.gu@droid12

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      DDR3 chl: Rank0+1 @ 912MHz - FAIL
      DDR3 chl: Rank0 @ 912MHz - FAIL
      DDR3 chl: Rank0 16bit @ 912MHz - FAIL
      DDR4 chl: R▒-Z▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:2;RCY :0;USB:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
      no sdio debug board detected
      TE: 146117

      BL2 Built : 20:32:17, Sep 8 2017.
      gxl g6296b83 - xiaobo.gu@droid12

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      DDR3 chl: Rank0+1 @ 912MHz - FAIL
      DDR3 chl: Rank0 @ 912MHz - FAIL
      DDR3 chl: Rank0 16bit @ 912MHz - FAIL
      DDR4 chl: R▒-Z▒▒912MHzGXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;PO C:2;RCY:0;USB:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CH K:0;
      no sdio debug board detected
      TE: 146122

      BL2 Built : 20:32:17, Sep 8 2017.
      gxl g6296b83 - xiaobo.gu@droid12

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      DDR3 chl: Rank0+1 @ 912MHz - FAIL
      DDR3 chl: Rank0 @ 912MHz - FAIL
      DDR3 chl: Rank0 16bit @ 912MHz - FAIL
      DDR4 chl: R▒▒+1 @ 912MHzeGXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC: 2;RCY:0;USB:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK: 0;
      no sdio debug board detected
      TE: 146134

      BL2 Built : 20:32:17, Sep 8 2017.
      gxl g6296b83 - xiaobo.gu@droid12

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      DDR3 chl: Rank0+1 @ 912MHz - FAIL
      DDR3 chl: Rank0 @ 912MHz - FAIL
      DDR3 chl: Rank0 16bit @ 912MHz - FAIL
      DDR4 chl: R▒kZ▒@ 912MHz

      This continues like this as long as box is connected to pc.

      Comment


        #33
        Okay, in about 1 hour I put a different bootloader version available, the clk rate has to be reduced. It is very sad that Beelink has such a poor RAM memory quality.

        Comment


          #34
          Ok, thanks.

          Comment


            #35
            first try the 792mhz version, if it does not work, then 672mhz version. Boot log is desired.

            u-boot@792mhz
            u-boot@672mhz

            Comment


              #36
              Here is 792mhz bootlog:

              GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0 ;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
              no sdio debug board detected
              TE: 139759

              BL2 Built : 11:58:42, May 27 2017.
              gxl gc3c9a84 - xiaobo.gu@droid05

              set vdd cpu_a to 1120 mv
              set vdd cpu_b to 1050 mv
              set vddee to 1000 mv
              Board ID = 6
              CPU clk: 1200MHz
              DQS-corr enabled
              DDR scramble enabled
              DDR3 chl: Rank0+1 @ 792MHz - FAIL
              DDR4 chl: Rank0+1 @ 792MHz - PASS
              Rank0: 2048MB(auto)-2T-18
              Rank1: 1024MB(auto)-2T-18
              DataBus test pass!
              AddrBus test pass!
              Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
              New fip structure!
              Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
              Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
              Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200
              ▒▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY :0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
              no sdio debug board detected
              TE: 139738

              BL2 Built : 11:58:42, May 27 2017.
              gxl gc3c9a84 - xiaobo.gu@droid05

              set vdd cpu_a to 1120 mv
              set vdd cpu_b to 1050 mv
              set vddee to 1000 mv
              Board ID = 6
              CPU clk: 1200MHz
              DQS-corr enabled
              DDR scramble enabled
              DDR3 chl: Rank0+1 @ 792MHz - FAIL
              DDR4 chl: Rank0+1 @ 792MHz - PASS
              Rank0: 2048MB(auto)-2T-18
              Rank1: 1024MB(auto)-2T-18
              DataBus test pass!
              AddrBus test pass!
              Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
              New fip structure!
              Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
              Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
              Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200
              epGXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY :0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
              no sdio debug board detected
              TE: 139746

              BL2 Built : 11:58:42, May 27 2017.
              gxl gc3c9a84 - xiaobo.gu@droid05

              set vdd cpu_a to 1120 mv
              set vdd cpu_b to 1050 mv
              set vddee to 1000 mv
              Board ID = 6
              CPU clk: 1200MHz
              DQS-corr enabled
              DDR scramble enabled
              DDR3 chl: Rank0+1 @ 792MHz - FAIL
              DDR4 chl: Rank0+1 @ 792MHz - PASS
              Rank0: 2048MB(auto)-2T-18
              Rank1: 1024MB(auto)-2T-18
              DataBus test pass!
              AddrBus test pass!
              Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
              New fip structure!
              Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
              Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
              Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200
              ^▒▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RC Y:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
              no sdio debug board detected
              TE: 139757

              BL2 Built : 11:58:42, May 27 2017.
              gxl gc3c9a84 - xiaobo.gu@droid05


              And 672mhz:

              GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0 ;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
              no sdio debug board detected
              TE: 140643

              BL2 Built : 20:32:17, Sep 8 2017.
              gxl g6296b83 - xiaobo.gu@droid12

              set vdd cpu_a to 1120 mv
              set vdd cpu_b to 1050 mv
              set vddee to 1000 mv
              Board ID = 6
              CPU clk: 1200MHz
              DQS-corr enabled
              DDR scramble enabled
              STICKY_REG0: 0x00000000
              STICKY_REG1: 0x00000000
              STICKY_REG9: 0x00000000
              DDR3 chl: Rank0+1 @ 672MHz - FAIL
              STICKY_REG0: 0x00000000
              STICKY_REG1: 0x00000000
              STICKY_REG9: 0x00000000
              DDR4 chl: Rank0+1 @ 672MHz - PASS
              Rank0: 2048MB(auto)-2T-18
              Rank1: 1024MB(auto)-2T-18
              DataBus test pass!
              AddrBus test pass!
              Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
              New fip structure!
              Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
              Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002c600
              Load bl33 from SD, src: 0x00050200, des: 0x01000000, size: 0x00066600
              ፕ▒▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RC Y:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
              no sdio debug board detected
              TE: 140683

              BL2 Built : 20:32:17, Sep 8 2017.
              gxl g6296b83 - xiaobo.gu@droid12

              set vdd cpu_a to 1120 mv
              set vdd cpu_b to 1050 mv
              set vddee to 1000 mv
              Board ID = 6
              CPU clk: 1200MHz
              DQS-corr enabled
              DDR scramble enabled
              STICKY_REG0: 0x00000000
              STICKY_REG1: 0x00000000
              STICKY_REG9: 0x00000000
              DDR3 chl: Rank0+1 @ 672MHz - FAIL
              STICKY_REG0: 0x00000000
              STICKY_REG1: 0x00000000
              STICKY_REG9: 0x00000000
              DDR4 chl: Rank0+1 @ 672MHz - PASS
              Rank0: 2048MB(auto)-2T-18
              Rank1: 1024MB(auto)-2T-18
              DataBus test pass!
              AddrBus test pass!
              Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
              New fip structure!
              Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
              Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002c600
              Load bl33 from SD, src: 0x00050200, des: 0x01000000, size: 0x00066600
              ▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY: 0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
              no sdio debug board detected
              TE: 140679

              BL2 Built : 20:32:17, Sep 8 2017.
              gxl g6296b83 - xiaobo.gu@droid12

              set vdd cpu_a to 1120 mv
              set vdd cpu_b to 1050 mv
              set vddee to 1000 mv
              Board ID = 6
              CPU clk: 1200MHz
              DQS-corr enabled
              DDR scramble enabled
              STICKY_REG0: 0x00000000
              STICKY_REG1: 0x00000000
              STICKY_REG9: 0x00000000
              DDR3 chl: Rank0+1 @ 672MHz - FAIL
              STICKY_REG0: 0x00000000
              STICKY_REG1: 0x00000000
              STICKY_REG9: 0x00000000
              DDR4 chl: Rank0+1 @ 672MHz - PASS
              Rank0: 2048MB(auto)-2T-18
              Rank1: 1024MB(auto)-2T-18
              DataBus test pass!
              AddrBus test pass!
              Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
              New fip structure!
              Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
              Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002c600
              Load bl33 from SD, src: 0x00050200, des: 0x01000000, size: 0x00066600

              Comment


                #37
                RAM memory has now been properly initialized. BL33 (u-boot) does not start though. There was apparently an error writing. Please first delete all data from the SD card -> use SD Formatter. Then repeat the writing process from the bootloader @792Mhz.

                Comment


                  #38
                  So, I use SD formatter and format sd card (FAT32).
                  Then use BootcardMaker with u-boot.bin.sd.bin @792Mhz and make the card.
                  It says "success", then I put sdcard to slot in the box.
                  Connect box to pc and power, Putty give me bootlog.
                  I write this to see if I miss something.

                  GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0 ;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
                  no sdio debug board detected
                  TE: 139824

                  BL2 Built : 11:58:42, May 27 2017.
                  gxl gc3c9a84 - xiaobo.gu@droid05

                  set vdd cpu_a to 1120 mv
                  set vdd cpu_b to 1050 mv
                  set vddee to 1000 mv
                  Board ID = 6
                  CPU clk: 1200MHz
                  DQS-corr enabled
                  DDR scramble enabled
                  DDR3 chl: Rank0+1 @ 792MHz - FAIL
                  DDR4 chl: Rank0+1 @ 792MHz - PASS
                  Rank0: 2048MB(auto)-2T-18
                  Rank1: 1024MB(auto)-2T-18
                  DataBus test pass!
                  AddrBus test pass!
                  Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
                  New fip structure!
                  Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
                  Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
                  Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200
                  ▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY: 0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
                  no sdio debug board detected
                  TE: 139774

                  BL2 Built : 11:58:42, May 27 2017.
                  gxl gc3c9a84 - xiaobo.gu@droid05

                  set vdd cpu_a to 1120 mv
                  set vdd cpu_b to 1050 mv
                  set vddee to 1000 mv
                  Board ID = 6
                  CPU clk: 1200MHz
                  DQS-corr enabled
                  DDR scramble enabled
                  DDR3 chl: Rank0+1 @ 792MHz - FAIL
                  DDR4 chl: Rank0+1 @ 792MHz - PASS
                  Rank0: 2048MB(auto)-2T-18
                  Rank1: 1024MB(auto)-2T-18
                  DataBus test pass!
                  AddrBus test pass!
                  Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
                  New fip structure!
                  Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
                  Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
                  Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200

                  Comment


                    #39
                    BL33 does not start. Do you have a Linux PC at home? I prefer Linux Terminal ..
                    Or another box with preinstalled Linux or Android (rooted)?

                    Comment


                      #40
                      Do not have LInux, sorry.
                      I have R-Box Pro box and it's rooted. What we can do with it?
                      I have Nvidia Shield K1 tablet, also.

                      Comment


                        #41
                        We can write u-boot to the MicroSD card via Android Terminal. I'll write a short tutorial right away.

                        Comment


                          #42
                          1. Format MicroSD Card in FAT32 and put it in the Android box.
                          2. Copy u-boot.bin.sd.bin to the folder /sdcard of your Android Box.
                          3. Open Android Terminal App and run the following commands:
                          Code:
                          su
                          
                          dd if=/dev/block/zero of=/dev/block/mmcblk1 bs=1 count=442
                          
                          dd if=/dev/block/zero of=/dev/block/mmcblk1 bs=512 skip=1 seek=1 count=2047
                          
                          dd if=/sdcard/u-boot.bin.sd.bin of=/dev/block/mmcblk1 bs=1 count=442
                          
                          dd if=/sdcard/u-boot.bin.sd.bin of=/dev/block bs=512 skip=1 seek=1
                          
                          sync

                          Comment


                            #43
                            Can I do this with my rooted HTC One M8?
                            Ok, will try when I get home. Thanks.
                            Last edited by Nebojsa; 06-07-2018, 13:25.

                            Comment


                              #44
                              dd: /dev/block/zero: no such file or directory

                              Here is what I have in /dev/block directory



                              This is a directory of my working R-Box pro box where I started Terminal emulator for Android.

                              Comment


                                #45
                                sorry I fell asleep. Before we move on, try to write u-boot.bin instead of u-boot.bin.sd.bin on the SD card. I do not have windows and can not control how BootcardMaker works

                                Comment

                                Working...
                                X