Announcement

Collapse
No announcement yet.

Help me please erro [0x30405004] USB burning tool

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Yes, so do I
    I tried with u-boot.bin but no luck.

    LOOP:2;EMMC:0;READ:800;SD:0;READ:0;CHK:AA;USB:8;LO OP:3;EMMC:0;READ:800;SD:0;READ:0;CHK:AA;USB:8;LOOP :4;EMMC:0;READ:800;SD:0;READ:0;CHK:AA;USB:8;LOOP:5 ;EMMC:0;READ:800;SD:0;READ:0;CHK:AA;USB:8;

    Comment


    • #47
      Ok., then we were right with the procedure. Incidentally, "dd" is also available for Windows.
      You can also run Linux on Windows via VMware.
      Please inform yourself about these possibilities and I will check the BL33 in time.

      Comment


      • #48
        Nebojsa

        I'll provide you with another u-boot version (u-boot.img) to download today. You can easily write this version to the MicroSD card via the Win32DiskImager.

        Comment


        • #49
          I got Win32DiskImager and waiting Thanks!

          Comment


          • #50
            Please use only the Win32DiskImager for ODROID with option "Verify" (see link above)

            u-boot.img.zip

            Comment


            • #51
              Done everything, here is boot log, can't see any errors, that's a good thing:

              GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0 ;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
              no sdio debug board detected
              TE: 139700

              BL2 Built : 11:58:42, May 27 2017.
              gxl gc3c9a84 - xiaobo.gu@droid05

              set vdd cpu_a to 1120 mv
              set vdd cpu_b to 1050 mv
              set vddee to 1000 mv
              Board ID = 6
              CPU clk: 1200MHz
              DQS-corr enabled
              DDR scramble enabled
              DDR4 chl: Rank0+1 @ 816MHz
              Rank0: 2048MB(auto)-2T-18
              Rank1: 1024MB(auto)-2T-18
              DataBus test pass!
              AddrBus test pass!
              Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
              New fip structure!
              Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
              Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
              Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200
              ▒▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY :0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
              no sdio debug board detected
              TE: 139665

              BL2 Built : 11:58:42, May 27 2017.
              gxl gc3c9a84 - xiaobo.gu@droid05

              set vdd cpu_a to 1120 mv
              set vdd cpu_b to 1050 mv
              set vddee to 1000 mv
              Board ID = 6
              CPU clk: 1200MHz
              DQS-corr enabled
              DDR scramble enabled
              DDR4 chl: Rank0+1 @ 816MHz
              Rank0: 2048MB(auto)-2T-18
              Rank1: 1024MB(auto)-2T-18
              DataBus test pass!
              AddrBus test pass!
              Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
              New fip structure!
              Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
              Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
              Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200
              GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0 ;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
              no sdio debug board detected
              TE: 139706

              BL2 Built : 11:58:42, May 27 2017.
              gxl gc3c9a84 - xiaobo.gu@droid05

              set vdd cpu_a to 1120 mv
              set vdd cpu_b to 1050 mv
              set vddee to 1000 mv
              Board ID = 6
              CPU clk: 1200MHz
              DQS-corr enabled
              DDR scramble enabled
              DDR4 chl: Rank0+1 @ 816MHz
              Rank0: 2048MB(auto)-2T-18
              Rank1: 1024MB(auto)-2T-18
              DataBus test pass!
              AddrBus test pass!
              Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
              New fip structure!
              Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
              Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
              Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200

              Comment


              • #52
                Strangely, this u-boot works fine on my box. Have you tried to connect another power supply? Other microSD card? I'll unpack original u-boot from the Android FW to rule out all sorts of bugs. Please be patient.

                Comment


                • #53
                  Nebojsa

                  u-boot-orig.img.zip

                  Comment


                  • #54
                    OK, thanks, I'm out of town so will try tomorrow night.

                    Comment


                    • #55
                      I'm back.
                      Here's the log, box isn't booting...

                      GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0 ;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
                      no sdio debug board detected
                      TE: 142347

                      BL2 Built : 13:18:48, Dec 21 2016.
                      gxl g4fc4d4e - xiaobo.gu@droid05

                      set vdd cpu_a to 1120 mv
                      set vdd cpu_b to 1050 mv
                      set vddee to 1000 mv
                      Board ID = 6
                      CPU clk: 1200MHz
                      DQS-corr enabled
                      DDR scramble enabled
                      DDR4 chl: Rank0+1 @ 636MHz
                      Rank0: 2048MB-2T-18
                      Rank1: 1024MB-2T-18
                      DataBus test pass!
                      AddrBus test pass!
                      Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
                      New fip structure!
                      Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
                      Load bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00015400
                      Load bl33 from SD, src: 0x00038200, des: 0x01000000, size: 0x000a9a00

                      Comment


                      • #56
                        The box can boot only if BL33 is running. It's obviously a hardware issue, all the bootloaders that I have provided to you work on other boxes. Two questions above have not been answered yet. Check the the UART connection, the log is not complete.

                        Comment


                        • #57
                          DFC318C:80;POC:3;RCY:0;EMMC:0;READ:800;SD:0;READ:0 ;0.0;CHK:0;
                          no sdio debug board detected
                          TE: 142389

                          BL2 Built : 13:18:48, Dec 21 2016.
                          gxl g4fc4d4e - xiaobo.gu@droid05

                          set vdd cpu_a to 1120 mv
                          set vdd cpu_b to 1050 mv
                          set vddee to 1000 mv
                          Board ID = 6
                          CPU clk: 1200MHz
                          DQS-corr enabled
                          DDR scramble enabled
                          DDR4 chl: Rank0+1 @ 636MHz
                          Rank0: 2048MB-2T-18
                          Rank1: 1024MB-2T-18
                          DataBus test pass!
                          AddrBus test pass!
                          Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
                          New fip structure!
                          Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
                          Load bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00015400
                          Load bl33 from SD, src: 0x00038200, des: 0x01000000, size: 0x000a9a00
                          ▒xceGXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;R CY:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
                          no sdio debug board detected
                          TE: 142380

                          BL2 Built : 13:18:48, Dec 21 2016.
                          gxl g4fc4d4e - xiaobo.gu@droid05

                          set vdd cpu_a to 1120 mv
                          set vdd cpu_b to 1050 mv
                          set vddee to 1000 mv
                          Board ID = 6
                          CPU clk: 1200MHz
                          DQS-corr enabled
                          DDR scramble enabled
                          DDR4 chl: Rank0+1 @ 636MHz
                          Rank0: 2048MB-2T-18
                          Rank1: 1024MB-2T-18
                          DataBus test pass!
                          AddrBus test pass!
                          Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
                          New fip structure!
                          Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
                          Load bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00015400
                          Load bl33 from SD, src: 0x00038200, des: 0x01000000, size: 0x000a9a00
                          ▒xcGXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RC Y:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
                          no sdio debug board detected
                          TE: 142372

                          BL2 Built : 13:18:48, Dec 21 2016.
                          gxl g4fc4d4e - xiaobo.gu@droid05

                          set vdd cpu_a to 1120 mv
                          set vdd cpu_b to 1050 mv
                          set vddee to 1000 mv
                          Board ID = 6
                          CPU clk: 1200MHz
                          DQS-corr enabled
                          DDR scramble enabled
                          DDR4 chl: Rank0+1 @ 636MHz
                          Rank0: 2048MB-2T-18
                          Rank1: 1024MB-2T-18
                          DataBus test pass!
                          AddrBus test pass!
                          Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
                          New fip structure!
                          Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
                          Load bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00015400
                          Load bl33 from SD, src: 0x00038200, des: 0x01000000, size: 0x000a9a00
                          GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0 ;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
                          no sdio debug board detected
                          TE: 142378

                          BL2 Built : 13:18:48, Dec 21 2016.
                          gxl g4fc4d4e - xiaobo.gu@droid05

                          set vdd cpu_a to 1120 mv
                          set vdd cpu_b to 1050 mv
                          set vddee to 1000 mv
                          Board ID = 6
                          CPU clk: 1200MHz
                          DQS-corr enabled
                          DDR scramble enabled
                          DDR4 chl: Rank0+1 @ 636MHz
                          Rank0: 2048MB-2T-18
                          Rank1: 1024MB-2T-18
                          DataBus test pass!
                          AddrBus test pass!
                          Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
                          New fip structure!
                          Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
                          Load bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00015400
                          Load bl33 from SD, src: 0x00038200, des: 0x01000000, size: 0x000a9a00
                          dGXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY: 0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
                          no sdio debug board detected
                          TE: 142439

                          BL2 Built : 13:18:48, Dec 21 2016.
                          gxl g4fc4d4e - xiaobo.gu@droid05

                          set vdd cpu_a to 1120 mv
                          set vdd cpu_b to 1050 mv
                          set vddee to 1000 mv
                          Board ID = 6
                          CPU clk: 1200MHz
                          DQS-corr enabled
                          DDR scramble enabled
                          DDR4 chl: Rank0+1 @ 636MHz
                          Rank0: 2048MB-2T-18
                          Rank1: 1024MB-2T-18
                          DataBus test pass!
                          AddrBus test pass!
                          Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
                          New fip structure!
                          Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
                          Load bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00015400
                          Load bl33 from SD, src: 0x00038200, des: 0x01000000, size: 0x000a9a00


                          That is the log, then everything is repeating over and over...
                          Do not have another micro sd card, can that be a problem? I can tell the card is working normally as i can see...
                          I tried with another power supply and it's the same, tried this power supply to another box (5V 2A) and box is working normally, so the power is ok.

                          Comment


                          • #58
                            Some progress!
                            The log was changed when I plug, beside power supply, also the usb cable!
                            So, now is connected power, usb male to male to port next to the micro usb, UART and HDMI with tv.
                            Box still won't boot.

                            GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:2;RCY:0 ;USB:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
                            no sdio debug board detected
                            TE: 147967

                            BL2 Built : 13:18:48, Dec 21 2016.
                            gxl g4fc4d4e - xiaobo.gu@droid05

                            set vdd cpu_a to 1120 mv
                            set vdd cpu_b to 1050 mv
                            set vddee to 1000 mv
                            Board ID = 6
                            CPU clk: 1200MHz
                            DQS-corr enabled
                            DDR scramble enabled
                            DDR4 chl: Rank0+1 @ 636MHz
                            Rank0: 2048MB-2T-18
                            Rank1: 1024MB-2T-18
                            DataBus test pass!
                            AddrBus test pass!
                            Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
                            New fip structure!
                            Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
                            Load bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00015400
                            Load bl33 from SD, src: 0x00038200, des: 0x01000000, size: 0x000a9a00
                            NOTICE: BL3-1: v1.0(debug):2e39a99
                            NOTICE: BL3-1: Built : 16:36:21, Sep 20 2016
                            aml log : bl31 normal boot !
                            [Image: gxl_v1.1.3154-065f772 2016-09-29 14:08:54 yan.wang@droid05]
                            OPS=0x82
                            8b a8 52 a4 2f 34 df e4 3 3c 95 50 [0.562517 Inits done]
                            secure task start!
                            high task start!
                            low task start!
                            INFO: BL3-1: Initializing runtime services
                            WARNING: No OPTEE provided by BL2 boot loader
                            ERROR: Error initializing runtime service opteed_fast
                            INFO: BL3-1: Preparing for EL3 exit to normal world
                            INFO: BL3-1: Next image address = 0x1000000
                            INFO: BL3-1: Next image spsr = 0x3c9


                            U-Boot 2015.01-gf3cbd70 (Feb 24 2017 - 22:51:16)

                            DRAM: 3 GiB
                            Relocation Offset is: b6ec9000

                            Comment


                            • #59
                              UART and HDMI with tv.
                              How is it?
                              Please only connect UART, please do not connect any other consumer for the tests. The length of uart cable should not be longer than 20cm-30cm if possible.

                              Comment


                              • #60
                                U-Boot starts now, but the log is not displayed. Something are you doing wrong. Try using another program instead of putty.

                                Comment

                                Working...
                                X