Announcement

Collapse
No announcement yet.

[ROM] Beelink GT1 Ultimate SCV1 ("Normal" Android) (DDR4)

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • superceleron Would it be possible to use the kernel from the H96 Pro+ on this ROM?

    Comment


    • How to prevent the Ax12 series from being caught and frozen. Is the performance down and the 3d problem hardware? Will it fix with software? Please help me.

      Comment


      • Originally posted by BrandoR View Post
        superceleron Would it be possible to use the kernel from the H96 Pro+ on this ROM?
        Yes it should work!

        Comment


        • Originally posted by BrandoR View Post

          Thats pretty substantial! I hit 65*C on the regular with Kodi. Are you powering the fan with the USB port on the box?

          Yes!!
          Only turns on when i plug electricity, and since used only 5V is quiete silent fan noise...

          I use a little Bondic glue on the corners of the dissipator, so i should remove it on future easily...

          Hope i did help someone to cool down it.

          Let me confirm if it is 30 or 40º.......lolol

          Comment


          • Originally posted by superceleron View Post

            Yes it should work!
            Could you please make the file available for download? I'd like to test a kernel with all cores at 1.5 ghz and OC gpu on this ROM!

            Comment


            • Originally posted by BrandoR View Post

              Could you please make the file available for download? I'd like to test a kernel with all cores at 1.5 ghz and OC gpu on this ROM!
              That is not in the kernel m8, is a big mod on the device tree, and every device have its how device tree!

              Comment


              • Originally posted by BrandoR View Post
                superceleron Would it be possible to use the kernel from the H96 Pro+ on this ROM?
                you have tested ? you have link and how i can install kernel h96 pro + on this rom ,is the best rom so far for h96 pro+

                Comment


                • First I want to thank superceleron for creating this ROM, This ROM worked like a charm on my Beelink GT1 Ultimate with SN: AX12........

                  Looks like there are a lot of confusion on how to flash this ROM on to the G1 Ultimate so I will tell what worked for me.

                  1. First I downloaded the SCV1-GT1_Ultimate.zip and unpacked this zip file to a folder so I got the SCV1-GT1_Ultimate.img file in this folder.

                  2 I flashed this with usb burning tool v2.0.8, Connect the G1 Ultimate with usb cable male to male cable.

                  3. Hold the reset button pressed in and connect the USB cable to the port next to the microSD card slot. and hold the reset button for 10-20 sec
                  and then the usb burning tool should have a connection to the G1 Ultimate.

                  4. Open up the SCV1-GT1_Ultimate.img with usb burning tool and flash, I had Erase flash set to Normal erase and Erase bootloader also check.
                  this took about 3 minutes to flash onto the G1 Ultimate.

                  The G1 Ultimate had the default stock firmware GT1_704N0_LTM8830.img on it before I flashed and this worked without any problems.

                  I can also comfirm that it is safe to flash with Erase bootloader checked when using usb burning tool.


                  This ROM work a lot better than GT1_704N0 firmware with the default ROM the G1 Ultimate with SN: AX12..... have a lot of issues obviously. The video playback
                  in kodi on default stock is terrible. stuttring and a lot of blocking artifacts and so on. But the SCV1 plays the same movies without any problems with FTMC.

                  One thing that is different from stock ROM and Kodi 17.4 is that there is a amcodec in FTMC witch is not there in Kodi 17.4 on stock firmware. Maybe the problem
                  with SN: AX12.... is a codec problem of some sort.

                  A few questions to superceleron, I wanted to set the G1 to 1080p 50Hz where did that option go? and dose the Android TV SCV1 have the same kind of hardware
                  support and amcodec?

                  -GM
                  Last edited by ghostmanno; 10-15-2017, 07:08.

                  Comment


                  • @ghostmanno

                    Please test 3D performance?

                    Comment


                    • Originally posted by bakara View Post
                      @ghostmanno

                      Please test 3D performance?
                      I ran AnTuTu the score was 39997, about 8600 for the 3d part of the score.

                      Comment


                      • Super thanks

                        Sent from my Redmi Note 4 using Tapatalk

                        Comment

                        Working...
                        X