Announcement

Collapse
No announcement yet.

HPH RK3288 Lollipop ROM v1.6 By Mo123

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • HPH RK3288 Lollipop ROM v1.6 By Mo123

    HPH RK3288 Lollipop ROM v1.12 (28-08-2017)

    Superspeed ROM
    lcdc:fix boot color not same
    devices:close radical_update
    devices:fix init
    driver:fix queue file
    dts: modify Voltage value for sdcard
    stagefright Fix HEVC in MKV for most clips
    rga2 correct BGRA stride
    rockchip: hdmi: fix LS49AL88A92 4K mode
    rockchip: hdmi: fix parse 1st block edid
    lvds/rgb: fix rgb output when have no lvds_format
    IEP: re-caculate the uv address when 4k video input in iommu enable case
    hdmi: v2: phy support clk 59.4MHz
    hdmiv1: fix no sound/noise problem
    hdmi: fix HDMI CTS HF1-33
    hdmi: yuv420 resolution retain 4K 50/60H
    hdmi: fix current color mode and depth info
    hdmi: modify wrong phy freq of 4k@60hz(yuv420)10bit
    hdmi: avoid endless loop when i2cm write abnormal
    rk3288: apll frequency up to 816M, speed up boot time
    fix Haier LS49AL88A92 4K 60/50 mode
    hdmi: select similar mode if sink does't support preset mode
    Remove ads
    Youtube ad-free
    Better gamepad support
    New RKMC Kodi
    Disabled onscreen keyboard sounds and changed highlighted key to blue

    Download Link:Here
    Pass:nagrace

    I need users to test if 4K is working better, pass-through and >1TB hard-drives can be detected and any other small bugs.
    Then I can try to fix it soon since I will be working on other ROM's later.


    HPH RK3288 Lollipop ROM v1.11 (01-06-2017)

    - Uses auto resolution by default
    - Updated apps
    - New FTMC Kodi (made by superceleron)
    - General stability, compatibility improvements

    Disable auto updates for Youtube & Netflix in Google Play.
    Root and install - https://play.google.com/store/apps/d...dr.boost&hl=en to improve speed and stability.
    Remove again and unroot if using apps that complain about root.

    Download Link:Here
    Pass:nagrace


    HPH RK3288 Lollipop ROM v1.10 (28-03-2017)

    - Fix sound playing on both speakers and bluetooth at the same time to only play via bluetooth
    - Fix the SPDIF Pass-through(Please test)
    - Add sleep mode - Long press power button to choose Sleep or short press power button to go to sleep
    - Improve the Time Localization
    - Improve the Unroot method
    - Fix some wireless remotes not showing the software keyboard
    - Add-free Youtube Playback(Please disable auto update for Youtube in Google Play Store)
    - Updated apps

    Download Link:Here
    Auto resolution boot image: Here
    Pass:nagrace


    HPH RK3288 Lollipop ROM v1.9 (23-01-2017)


    - Build from scratch
    -Pass-through should work now
    - Latest apps
    - New NTMC


    Download Link:Here
    Pass:nagrace



    Changelog v1.8a (12-12-2016)

    - Default Resolution 1080p
    If wanting to use 720p as default, please use v1.8 firmware or if your display only support 720p.
    - Auto frame-rate switching fixed
    - More streaming apps that complained about root should work now
    - Passthrough changes, please test if it works now, otherwise I'll rebuild firmware completely again.
    Post Kodi 17 beta 7 logs if there is a problem, it will show all the pass-through capabilities present in the firmware.
    NTMC should still work the best or users can try FTMC instead.

    Download Link:Here
    Pass:nagrace



    Changelog v1.8 (02-12-2016)

    - Fix the Google Play problem
    - Improve video playback
    - Latest codecs and video framework
    - Updated launcher
    - App Market included
    - Fixed Netflix audio out of sync(still to test)
    - New Xbox Xpad driver, more compatible gamepads should work
    - Fix resolution problem after boot


    Download Link: Here
    Pass: nagrace

    Changelog v1.7b (09-09-2016)
    - Fixed Pink screen on boot on some setups
    - Interlaced content can now be played in NTMC
    Only tested local video playback
    Please test Live TV PVR addons with 576i/1080i streams
    - New Codecs
    - Display Options - Auto Frame-rate switching
    Please experiment with the 2 settings in different video players.

    For Netflix
    Please test with:
    Screen resolution - 1920x1080p@24hz
    Display Options - Auto frame-rate - Video resolution priority

    Flash Tool & Drivers: Here
    Download link

    https://mega.nz/#!dJlACYZI!pUr7cbLzjvHm5gsoPzBbTxRF_O02C9eTnYhAj9hhDDM
    Pass: nagrace

    Changelog v1.7
    Hide battery menu and notification icon
    Fix system stutter cased by USB audio devices
    Remote - Solve the issues of some remote controllers cannot continuously press
    Change bluetooth name to HPH_NT-V6
    Long press menu button to hide/unhide statusbar
    Animations turned off
    Some pre-installed apps removed and replaced by better apps, file manager, gallery etc.
    Removed smspush app to free around 30MB memory usage
    New Google apps

    NTMC
    Latest custom lbrtmp.so file required for some streaming services
    Better cache and timeout settings
    Changed app's complete name to NTMC in menus, app install location is now /sdcard/data/com.ntmc.xbmc
    Fixed SD mpeg 1/2 video playback
    HD mpeg 1/2 now play correctly with RKCode

    ------------------------------------------------------------------------------------------------------
    Update 1/8/16
    Download Link: Here
    Pass:
    Nagrace

    Flash Tool & Drivers: Here

    Changelog v1.6
    Code:
    Updated NTMC(based on Kodi)
    - RKMC + SPMC merged
    - Optimized pass-through settings by default
    - Disabled unneccessary services
    - Better cache support
    - External player support - Long press left mouse button or 'c' on a video link to play with RKVideoPlayer(Stock) or MXPlayer
    
    Removed unnecessary apps
    Replaced Gallery app
    Replaced Browser app
    Replaced Es File Explorer with MiXplorer - Go to settings and set the left menu static if needed.
    -Tabbed folder views
    - Root support
    - Easy File Type view
    - Several online storage support
    - Much cleaner and add free than other file managers
    
    Launcher updated with working weather information
    Launcher shortcuts and categories
    Latest version of apps installed as on upload date
    Several extra remote layouts, Apple, Google, Preri, gamepads etc.
    Added several dvb/dvb-t2 tv tuner support
    
    vendor:update librkffplayer version
    tool:add loader version 2.30.10
    Eth:fix can not save static ip
    scale: add screen scale support
    [hardware/rockchip/hwcomposer] Merge v2.07_20160418
    fix spelling error: Ehernet
    fix bug: bt can not be foud after reopen bt in BluetoothSettings Activity
    solve camerarecord broken screen
    Update RkBoxVideoPlayer.apk version
    Update vpu lib version
    Modify videoPlayer can't full screen on BOX device
    phone or pad castscreen to box, Broken screen may occur and can't resume
    Use openDNS to replace bogus DNS
    update RkApkinstaller.apk
    
    rkplat: irqs: NR_IRQS instead of NR_IRQS_MAXNUM
    rk3288: fix getting pdbus pclk rate error.
    rk3288: fix i2c1 and i2c2 iobase define error.
    video: tve: get register value from dts
    32plat: enable sha256 image check.
    rk3288: ddr: support 3GB(8Gb+4Gb * 2channel)
    rk power: match the device's regulators with node-name.
    rk power: regulator match by node-name
    rk cru: module soft reset api move to clock module.
    SecureBoot: RSAKey Init using general api SecureRKModeRSAKeyInit
    rkplat: move most platform config to rkplat.h
    video: hdmi: No need to swap rb when output YCbCr420
    rkplat: some code only depend on CONFIG_RK_FLASH_BOOT_EN
    3288: miniloader: support sha 256
    ddr: ddr update to 20151202 version.
    rk secureboot: support for sha256.
    video: rockchip_fb: fix bmp 8bit logo display
    video: rockchip_fb: support direct show bmp data to display
    video: lcd: don't hack 24bit bmp as 32bit
    video: lcdc: fix RGB888 vir_width calc
    rkplat: Adjust partitions max support to 32.
    rk gic: reserve irq pend and secure api.
    video: hdmi: 322x: support YCbCr420 and 10bit
    rk pmu: Fix idle and power domain set error.
    rk cpu: Add rk_get_cpu_version() for get cpu eco version.
    video: hdmi: fix deep color setting
    rk tools: Adjust *.ini line ending to Unix/Linx type.
    rk power: detect i2c node as parent for pmic detect speed up.
    video: hdmi: fix avi pixel repetition
    rkplat: UMS boot: Adjust usb host config
    rk30plat: box product default disable pmic.
    rkplat: usb: redefine usb macros for UMS boot
    rk power: Fix compile error when pimc disable
    rkplat: rk power module depend on CONFIG_RK_POWER
    rk pl330 dma: driver version v1.4.
    rk io tool: update io tool, make io more robust.
    rk emmc: Free dmac chanel when emmc deinit.
    rk pl330 dma: driver version v1.3.
    rk plat: Fix code style for Git patch checking.
    rk plat: Add config CONFIG_RK_TVE for tve module of box product.
    gpt: command: Remove duplicated check for empty partition description
    gpt: fix error reporting on partition table write failures
    rockchip_fb: default set overscan value 100
    rk crc32: lib add rk crc32 support.
    rk ddr: armv7 plat dtb reserve memory banks when trust enable.
    rk emmc: idmac add reset when request.
    rkplat: box product default disable fg and battery driver
    rk plat: efuse api support for secure and ft
    rk loader: fix multiple read idb when get idb data.
    rk plat: fix fdt data abort when fdt doesn't load success.
    rk pwm regulatorAdd pwm regulator driver support.
    rk pwm: Add rk pwm driver support, depend on config CONFIG_RK_PWM.
    rk plat: pwm backlight driver move to driver/video/backlight.
    rk key: Key api support depend on config CONFIG_RK_KEY.
    rk power: fix pmic act8846 voltage table error.
    hdmi: 3288/3368: fix default mode vic judge error
    rk plat: Storage fix once Read/Write file size greater than 32M error.
    usb: fastboot fix urb and urb->buffer_data address cache line aligned.
    fastboot: handle zero size blocks in some sparse images
    env: import: hashtable: Free memory allocated before exiting from himport_r() without this patch memory is not released on early exit
    env: import: hashtable: Prevent buffer overrun when importing environment from file
    cli_simple.c: fix possible overflow when copying the string
    rk clock: rk3288/rk3368 mmc clock source select api using new mode
    [system/displayd]
    
    [System / displayd] Add savemode, for adaptive resolution:
    1. When the user sets a high resolution, such as 4K
    2. Then the box access to a low-resolution TV, such as 1080P
    3. Then take the box back to the original high-definition television (4K), the resolution can be automatically changed settings in 4K.
    
    [system/displayd] bcsh is enabled when bcsh value is changed
    [system/displayd] HDMI: when hdmi state change send message, use toast to flush frame
    video: rockchip: hdmi: skip operation when suspend or disabled
    video: rockchip: rk3288: fix extend screen type error
    video: rockchip: correct init extern screen before hdmi insert
    video: rockchip: lcdc: 3288: fix adjust gamma lut lead to display issue
    [hardware/rockchip/libiep] IEP: initialize rga_fd when contrast mode not enable
    [hardware/rockchip/audio] fix the ddp bitstream problem
    [hardware/rockchip/audio] 1. clear written when standby
    [frameworks/opt/net/wifi] add for wfd function
    [frameworks/opt/net/wifi] Fix a race in WifiNative objects
    [frameworks/native] auto-detecting 3d video
    [frameworks/native] IGraphicBufferProducer: fix QUEUE_BUFFER info leak
    [frameworks/native] IGraphicBufferConsumer: fix ATTACH_BUFFER info leak
    [frameworks/native] Add support for 3d displaying HDMI
    [frameworks/native] surface:fix hand-write flicker
    add number constraint for samples per MotionEvent
    [frameworks/native] check when addDevices in EventHub to prevent add same inputdevices twice
    Ensure that the device is provisioned before showing Recents.
    [frameworks/base] fix java.lang.NullPointerException
    [Frameworks / base] to modify the video mode dichotomous question Modify the mode switch will not switch problem immediately Modify the navigation bar background issue
    GenericSource: reset mDrmManagerClient when mDataSource is cleared.
    [frameworks/av] for cts, Revert "sf:add interface to control encorder frameRate for screenrecord"
    [frameworks/av] Fix out-of-bounds write
    fix possible overflow in effect wrappers.
    [frameworks/base] fix for cts
    [frameworks/base] little modify for updateDisplayShowSynchronization
    [frameworks/base] SystemUI:fix notificationIcons
    [frameworks/base] update 3D displaying jar:rockchipextensions_stereo.jar
    Modify some applications background black problem
    libstagefright: check requested memory size before allocation for SoftMPEG4Encoder and SoftVPXEncoder.
    SoundPool: add lock for findSample access from SoundPoolThread
    [frameworks/av] Zero out return values in media binder calls
    [frameworks/av] fix google save patch compile error
    [frameworks/av] DO NOT MERGE - OMX: allow only secure codec to remotely call allocateBuffer.
    [frameworks/av] stagefright: check bounds for MediaCodecList.getCodecInfo
    [frameworks/av] DO NOT MERGE - AudioFlinger: Clear record buffers when starting RecordThread
    [frameworks/av] ID3: check possible integer overflow for extendedHeaderSize and paddingSize.
    [frameworks/av] Check NAL size before use
    [frameworks/av] MPEG4Extractor: ensure buffer size is not less than 8 for LastCommentData.
    [frameworks/av] Don't crash when there's no conceal frame
    [frameworks/av] stagefright: fix AMessage::FromParcel
    [frameworks/av] DO NOT MERGE Fix vulnerability in mediaserver
    [frameworks/av] DO NOT MERGE NuCachedSource2: fix possible erroneous early free
    Limit allocations to avoid out-of-memory
    [external/wpa_supplicant_8] WNM: Ignore Key Data in WNM Sleep Mode Response frame if no PMF in use
    [external/libhevc] Fix the frame size alignments
    [external/libhevc] Aligned ps_pic_pu to 4 bytes
    [external/libhevc] DO NOT MERGE Added few memsets to avoid uninitialized reads for error clips
    [external/bluetooth/bluedroid] DO NOT MERGE - Add proper checks for PAN & BNEP in BD stack
    [device/rockchip/rk3288] add service drawpath
    [build] Updating security patch string to 2016-03-01
    ------------------------------------------------
    Changelog v1.5
    - New Rockchip Kodi 16.1 with standard Audio API support
    *Framepacking 3D
    * HDMI-24hz Bluray 3D
    *Auto Switch HDMI-3D Bluray 3D
    Please see below how to set correct audio settings for RKMC/Kodi if you have problems

    - Fix sound problems with games
    - Casting/mirroring support
    - Fix the Dolby Digital Plus problem
    - USB webcam mic fix
    - OK Google support
    - Fix ES File Manager black background.
    - New Security patches
    - NFS support
    - 'Lacie' hard drive support
    - Stable wifi performance for EU countries(Use wifi channels 1-11, if you need channels 12-13, it can be changed in the build.prop file)
    - HDMI-IN support for supported devices
    - Also works on Ugoos UT3/(S) devices

    Other features included
    1080p Youtube support
    LeHome Remote Control Assistant app for smartphones and tablets
    (scan the QR Code in Android Settings)
    Fixed MAC Ethernet address(useful for streaming apps, can also be flashed with your own mac address with Upgradell tool on a PC)
    Remote friendly launcher



    Download Link: Here
    Pass: nagrace
    Flash Tool & Drivers: Here

    Please test new Kodi and provide feedback.
    Would also like to know if SPMC works correctly.

    To use the casting feature
    1. Go to Display Options - Casting and enable 'Wireless Display' option from the 3 dots menu
    2. Do the same on your phone.
    3. Now connect to your tv box id and it will connect.
    Both devices should be connected to the same wifi network.


    Code:
    Correct Pass-Through Settings for RKMC
    Android settings
    -Resolution is set on AUTO
    -Frame-rate sync ENABLED(might not be available)
    -Color space is set on AUTO(might not be available)
    -Audio - Set to 'HDMI Bitstream' not 'Default'
    
    RKMC settings
    -Playback - Adjust display refresh rate - Always
    -Pause during refresh rate change - 11 seconds or lower, use what's best for you
    -Sync playback to display - On
    -Acceleration - Allow hardware acceleraton MediaCodec - On
    -RKMC Settings - Accelerate RKCodec - On
    -System - Audio output - Play GUI sounds - Never
    -Enable pass-through - On
    -DD/DD+/DTS/TrueHD/DTS-HD - On
    
    Here is a spreadsheet with Audio Receivers with best settings to use and what works
    https://docs.google.com/spreadsheets...gid=1685174283
    ------------------------------------------------

    Changelog v1.4 (or same features)
    - Unified Storage(+- 12.5GB available space)
    - 1080p Youtube support
    - Google Play Movies Support
    - DRM for streaming apps support
    - Fix sound problems with a connected airmouse
    - IP Multicast support
    - Extra Gamepad & IR Remote support
    - NTFS support
    - IR Remote working
    - Some people said 4K resolution switching from 720p didn't work in previous firmware, please test.
    - NTMC v16 Final (Nagrace Times Media Center)
    (RockchipCodec for improved 4K video playback, HD Audio, 3D, Auto refresh-rate switching, 4K UI Setting, improved streaming, PVR support)
    - Le Home Remote Control Assistant App - Scan the QR code to your Android/IOS device
    - Root Enabler/Disabler in Accessibility Options(useful if you want to disable root for using certain apps that don't work)


    It is the non HDMI-IN version but also work on the HDMI-IN device.
    For people that want to go back to the HDMI-IN firmware after flashing other firmwares, here is the link
    https://mega.nz/#!io1S0AiY!aZ-dnEv17...NHTCKp6-jw3b0U
    I will release the HDMI-IN version next week and also fix the remaining bugs.
    Can report any bugs here and also try to open a bug report on my site with a catlog here.


    For ES File Manager
    - Use Classic theme to fix color problem or change color theme manually

    To enable the Onscreen Keyboard
    - Settings - Input - Click the first Keyboard and enable 'Hardware Keyboard' to enable the onscreen keyboard.



    Download Link: Here
    Pass: nagrace
    Flash Tool & Drivers: Here


    Code:
    Instructions:
    
    Before Installation
    - Make sure USB Power saving mode is disabled for the USB Port you use to flash the device
    - Use a PC Back USB Port and not ones from the front or a laptop
    - Pause Antivirus software for 10 minutes to not interfere with the flashing or cause high disk usage.
    - Make sure device was connected to PC before in flash mode and drivers were installed
    
    To Install the drivers
    1. If flashing for the first time, you need to install the drivers with DriverInstall.exe
    2. If you recently upgraded your operating system to Windows 8.1 or higher, it's also a good idea to install the latest drivers.
    3. Let your PC recognize the device and automatically install the drivers
    - Connect the device with an OTG Port and cable to PC
    - Now connect the power adapter
    - Before plugging the power adapter into the device, hold a paperclip into the reset hole of the device, keep holding it while connecting
    the power. You will hear a 'click sound' that Windows has now recognized the USB device.
    - It will ask to install the drivers or install it automatically.
    
    Flashing the ROM
    1. Select 'Upgrade Firmware' in AndroidTool v2.35(Second tab)
    2. Click on the 'Firmware' button to load the firmware(update.img that you extracted from the 7zip compressed file)
    3. Click 'EraseFlash' to wipe your device, wait for it to finish.
    4. Click 'Upgrade' to flash the new firmware.
    5. Wait about 2 minutes after flashing and before unplugging device for firmware to settle.
    6. Disconnect from PC and connect to TV.
    Enjoy
    Nagrace's Website: Here
    Last edited by gefattern; 09-10-2017, 16:40.

  • #2
    Thanks Mo, great will try it out

    Edit: is it a dual boot Linux/android? Will be good also with changelog when you have time...thanks


    Last edited by Shadi86; 04-01-2016, 17:55.

    Comment


    • #3
      Originally posted by Shadi86 View Post
      Thanks Mo, great will try it out

      Edit: is it a dual boot Linux/android? Will be good also with changelog when you have time...thanks

      Just single Android OS with 12GB space.
      I will also make a dual-boot firmware after Mac_L1 has new developments for Kodi.


      Nagrace also released a new HP NT-V6B with Flydigi X9 gamepad with airmouse gyro functionality.
      It will work great for most Android games since the HPH NT-V6 gets an Antutu score of over 50000+ with non-overclocked kernels.
      It will also work great with AndroidTV Leanback Launcher firmware I will release later.

      Click image for larger version

Name:	HPH_RK3288.JPG
Views:	1
Size:	28.0 KB
ID:	564458

      Click image for larger version

Name:	feishu.gif
Views:	1
Size:	16.8 KB
ID:	564459
      Last edited by mo123; 04-01-2016, 21:31.

      Comment


      • #4
        Thanks Mo,
        just flashed, as a very first impression everything seems to work great for me.
        Just the HW power button isn't working properly on nt-v6.

        Does the official firmware have the Nagrace Launcher? Is there an apk?

        Thank you again!




        Comment


        • #5
          hello mo
          i tried to flash it to my netcouldgo12 ,but got black screen,
          does it support 8g box?
          thank you anyway

          Comment


          • #6
            Hi Mo! Thanks for this. can you tell me what rk3288 chipset units are available? thanks again for your work
            larry

            Comment


            • #7
              Originally posted by mting View Post
              hello mo
              i tried to flash it to my netcouldgo12 ,but got black screen,
              does it support 8g box?
              thank you anyway
              It should work.
              Have you tried 'EraseFlash' and then flashing the firmware again?
              If still not working can you try V1.3 Light Biz OS firmware I released and see if that works?

              Comment


              • #8
                Originally posted by nitrofish View Post
                Hi Mo! Thanks for this. can you tell me what rk3288 chipset units are available? thanks again for your work
                larry
                Not quite sure what you mean.
                The firmware will work on Nagrace HPH NT-V6, Ugoos UT3(s) and most other RK3288 devices.

                Comment


                • #9
                  Thanks man for you hard work.

                  I've got question: Can I use this firmware to "update" previous (1.3) version? I mean I would like to flash system, kernel, resource and boot but without misc partition.
                  I know that it is best to make clean install but right now I do not have time for this.
                  RK3288 2GB/16GB OC 1.9GHz at 1.2V RAM 792MHz@1.2V Wasser's 3.0.11 firmware
                  Out: monitor FullHD 16:9, 3.5" jack headphones; In: remote control, USB HUB: keyboard + mouse + pendrive
                  bricked: VOYO V1 mini 8G/64GB Windows 10

                  Comment


                  • #10
                    Originally posted by Gormar View Post
                    Thanks man for you hard work.

                    I've got question: Can I use this firmware to "update" previous (1.3) version? I mean I would like to flash system, kernel, resource and boot but without misc partition.
                    I know that it is best to make clean install but right now I do not have time for this.
                    You can try loading the parameter file from v1.3 Light Biz OS ROM and then flash boot.img, kernel.img, resource.img & system.img
                    But this version contain new apps so it will overwrite old Google apps or cause problems, NTMC and other apps already in userdata won't all work correctly then.
                    You can backup all your installed apps by going to /data/data or sdcard/android/data folder and copy all your apps to a flash drive and recopy them back after flashing the complete ROM.

                    Comment


                    • #11
                      cool build mo.... for me cant use until teamviewer (remote qucksupport) is done .... and that annoying thing with es file explorer is done.... loving your work

                      Comment


                      • #12
                        Originally posted by mo123 View Post

                        I will release the HDMI-IN version next week and also fix the remaining bugs.
                        Hey Mo'

                        Wow, sounds great! Will this work with the 'new' HDMI-IN box released last August? The last firmware I have is from September and was far too unstable to use.

                        Comment


                        • #13
                          Originally posted by jona5 View Post

                          Hey Mo'

                          Wow, sounds great! Will this work with the 'new' HDMI-IN box released last August? The last firmware I have is from September and was far too unstable to use.
                          Yes it works but all the HDMI-IN functions are removed.
                          The new ROM for next week will have all the HDMI-IN functions back, since they needed to add some features and fix bugs for the HDMI-IN for Lollipop.

                          Comment


                          • #14
                            Originally posted by mo123 View Post

                            It should work.
                            Have you tried 'EraseFlash' and then flashing the firmware again?
                            If still not working can you try V1.3 Light Biz OS firmware I released and see if that works?
                            Hi Mo
                            I tried the 1.3, it works well, and i tried to flash 1.4 with 1.3parameter file, still got black screen

                            BTW , I tried the 1.3 ntmc, it cant play h265 10bit file from NAS via NFS or SMB

                            Comment


                            • #15
                              Originally posted by mting View Post

                              Hi Mo
                              I tried the 1.3, it works well, and i tried to flash 1.4 with 1.3parameter file, still got black screen

                              BTW , I tried the 1.3 ntmc, it cant play h265 10bit file from NAS via NFS or SMB
                              Might be a limitation of Kodi.
                              Does the built-in rKVideoplayer play 10-bit videos?

                              Do you perhaps have a 720p display as the ROM is set up for 1080p by default?
                              Then I can just make a new kernel that supports 720p.

                              Comment

                              Working...
                              X