Announcement

Collapse
No announcement yet.

Firmware Upgrade Guide for Rockchip devices

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by neomode View Post
    So then we need the Firmware for the 2GB device.
    Right now don't know where to find.
    Must take a look around

    Neomode
    ok thank you

    Comment


      #17
      https://chinagadgetsreviews.com/down...ni-tv-box.html
      i tried this but it reach 98% and give an error ..[0x30401002]UBOOT/partition/bootloader./identity/USB control setup

      Comment


        #18
        Originally posted by deetucks View Post
        https://chinagadgetsreviews.com/down...ni-tv-box.html
        i tried this but it reach 98% and give an error ..[0x30401002]UBOOT/partition/bootloader./identity/USB control setup
        Hi ,

        what about the Rom of Nayam Amarshe for S905W SoC ??? shall it work , you can ask there ,

        to find under "TodaysPosts"

        good luck / gefattern

        Comment


          #19
          i found one that works already and i even found the original firmware after.. thank you for your help..

          Comment


            #20
            Hi guys from Italy.
            I've a MXQ Pro 4K (pic 1) bricked, blocked on MXQ logo.
            It seems a Rockchip device (as you can seen in the pic).
            I tried to unbrick with the SD method: failed (pic 3).
            Anyone can help me? What is wrong?
            Thx in advance
            Sec

            Comment


              #21
              Originally posted by sector60 View Post
              Hi guys from Italy.
              I've a MXQ Pro 4K (pic 1) bricked, blocked on MXQ logo.
              It seems a Rockchip device (as you can seen in the pic).
              I tried to unbrick with the SD method: failed (pic 3).
              Anyone can help me? What is wrong?
              Thx in advance
              Sec
              Hi ,

              use the PC Way , works much better , if you need more Info ask ,

              greetings / gefattern
              Last edited by gefattern; 10-09-2018, 02:32. Reason: correction

              Comment


                #22
                I'm still needing assistance with the stock firmware for the a95x box can't seem to find anything to run on it.. Everything I try is with error.. Box only boot to the xperience logo nothing more.. SD card won't work it pick up ok with pc..

                Comment


                  #23
                  Originally posted by gefattern View Post

                  Hi ,

                  use the PC Way , works much better , if you need more Info ask ,

                  greetings / gefattern
                  Thx pal!
                  Which way is better, Rockchip batch or Android tool?
                  Listen it's not so easy identify the box w/this methods

                  Comment


                    #24
                    Originally posted by sector60 View Post

                    Thx pal!
                    Which way is better, Rockchip batch or Android tool?
                    Listen it's not so easy identify the box w/this methods
                    Hi ,

                    for a Newbie the Batchtool is the little bit easier Way , because this Tool has only

                    one Tab , but the Way is on both the same , loading .img to Tool , prepare Box for

                    flashing and go , AT has additionally , part flashing , and some Test things , so for

                    you , BT is good , you can try AT too if you want , with AT you can make a full copy

                    of the installed Rom , ask if you need more help , greetings / gefattern

                    Comment


                      #25
                      No way. Both programs don't recognize Tv Box.
                      Have you more suggestions?

                      Comment


                      • scooter2014
                        scooter2014 commented
                        Editing a comment
                        Make sure you install drivers for device the last rockchip driver on site and also make sure you holding put into boot mode by pressing the reset switch and powering on make sure its held until boots in to recover. Then box will be seen in program.

                      #26
                      Originally posted by sector60 View Post
                      No way. Both programs don't recognize Tv Box.
                      Have you more suggestions?
                      Hi ,

                      please search on big G for the same Header as this Thread has , and you will find the Ugoos Site

                      with flashing Guide , good luck / gefattern

                      Comment

                      Working...
                      X