Announcement

Collapse
No announcement yet.

Guide for unbrick Zidoo H6 Pro if your android tv box is bricked. Firmware 1.0.25 IMG

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guide for unbrick Zidoo H6 Pro if your android tv box is bricked. Firmware 1.0.25 IMG

    New firmware for Zidoo H6 Pro 1.0.25 (+ a way to animate the console if it suddenly stops turning on)




    If you suddenly encounter a problem, your tv box Zidoo H6 Pro does not turn on, Android does not load, there's no Zidoo logo, and the usual way to reflash does not help, try the following method to decrypt TV set-top box:

    To do this you will need:Step-by-step instruction:

    1. Extract both files from the archive

    2. Run the PhoenixCard.exe file

    3. From the drop-down box, select the microSD card, click DiskCheck, and tick the Product.



    4. Click on Img File and select the firmware file that you downloaded from the link above.
    5. You can press Burn and wait for the end of the recording, then you should safely remove the memory card.

    6. Disconnect the Zidoo H6 Pro from the network, disconnect all devices from it to USB and turn off the power.

    7. Insert a memory card, connect to a monitor or TV, and power up. The installation process starts with the green bar, wait until the end, then turn off the power and remove the memory card, then you can turn it on and on again.



    Guide for unbrick zidoo h6 pro if your android tv box is bricked.

  • #2
    Please note : users report on zidoo forum :: this firmware has no root access
    and has some (kuck.. Many ) bugs regarding games/google store search

    * my advice...try "factory recovery" first, and this fw only as last resort
    Cheers

    Comment

    Working...
    X